Petzl Captiv Connector positioning Bar
The Petzl Captiv positioning bar helps load the karabiner along the major axis, limits flipping and keeps it integrated with the device or lanyard. The Petzl Captiv is compatible with OK, Am’D, WILLIAM, OXAN karabiners and the Rollclip A pulley karabiner.
Petzl Captiv Adjust
Karabiner positioning bar combined with an ADJUST rope adjuster
The Captiv Adjust positioning bar promotes loading of the karabiner on the major axis and helps hold the ADJUST rope adjuster in the proper position to reduce the risk of accidental release. It helps keep the lanyard and rope adjuster integrated with the karabiner, reducing the risk of losing them. Captiv Adjust is compatible with OK, Am'D, Bm'D and OXAN karabiners.
Petzl Express Sewn Sling (Quickdraw Extender)
Petzl Express Quickdraw sling, supplied with a Petzl String which holds the karabiner in place and offers protection for the quickdraw end. Perfect for sport climbing, it is wide enough to grab on to. Available in three lengths to meet all your needs.
Petzl Ultralegere (Ultralight) Pulley
Petzl Ultralegere (Ultralight) Pulley - Pulley for occasional use. Simple nylon sheave that can be installed on a karabiner. Size and weight reduced to an absolute minimum to the make lightest pulley available.
Petztl Crochlamp S Headlamp clips for thin-edged helmets (pack of 4)
Four headlamp clips for mounting a headlamp, compatible with thin-edged helmets. Allowing a headlamp to be installed on a helmet that lacks integrated headlamp clips.
Petzl Equipment holder for Canyon Club harness
The equipment holder for the CANYON CLUB harness provides additional racking options, making it easy for the guide to stow the karabiners of the DUAL CANYON CLUB lanyard. It connects to the waistbelt webbing of the harness.
Petzl Anneau Polyester Slings 18mm Wide
Petzl Anneau Polyester open loop slings 18mm wide are designed for setting up or extending belay or anchor point. Available in four lengths 60cm, 80cm, 120cm and 150cm.
Petzl Vertex, Petzl Alveo vent and best helmet foam liners - Pre 2019 only
Replacement foam liners for Petzl Vertex, Petzl Alveo vent and best helmets.
These foam liners are only compatible with the pre 2019 version of Petzl Vertex and Alveo helmets.
Petzl St'anneau Dyneema® sling
A lighter alternative to the all-nylon slings, these are color coded for ease in length identification.
Petzl Replacement Tikka / Tikkina Headband
Petzl Cutaway sling for CANYON CLUB harness
The cutaway sling for the CANYON CLUB harness allows a person to be quickly freed from a blockage, without damaging the harness or the rope. It is easy to install with a girth hitch on the harness attachment point.
Petzl Cutaway sling for CANYON GUIDE harness
The cutaway sling for the CANYON GUIDE harness allows a person to be quickly freed from a blockage, without damaging the harness or the rope. It attaches directly to the harness’s gated attachment point, limiting bulk.
Petzl Transparent Stickers for Vertex and Strato Helmets
Petzl Autocollants transparents. Page of 36 transparent stickers for personalizing Vertex and Strato helmets.
Comfort foam for Vertex and Strato helmets.
Comfort foam (standard or absorbent), ready to install on headband of a Vertex or Strato helmet, to prolong its life.
Petzl Upper Foam for Strato helmet
Upper foam installs on the liner of the STRATO helmet, to extend its life. Comfortable and absorbent, it is machine-washable.
IMPORTANT NOTICE: this tool holder is not PPE
Petzl Caritool
The CARITOOL tool holder allows the user to select and return tools with just one hand. It slips in through the harness straps and stays in place, thanks to its stabilising clip. The gate has a protective feature that limits accidental snagging. It is available in two sizes.
Petzl Fixation Tactikka® Helmet Mounting Kit
Fixation Tactikka® is a kit that allows the user to mount or unmount a Tactikka, Tactikka +, Tactikka +RGB or Tactikka CORE headlamp on a helmet any time, and keeps the option of adjusting the tilt of the headlamp. The system is especially resistant to impact and moisture.
Petzl Platine clip casque PIXA
Plate with helmet clip compatible with entire PIXA line.
Petzl Pantin Catch Left and Right
Available for left or right foot Petzl Pantin foot ascenders, the Petzl Catch is designed to stop the rope popping out of the ascender when in use, an occasional problem with foot grabs without a locking cam. Bought as a retro-fittable seperate spare part, the Catch still allows the user to easily insert or remove the rope.
Compatible with 2013 and 2016 versions.
Please note!
The Petzl Catch is an accessory for use on the Petzl Pantin
Petzl Kit Adapt
The Kit Adapt allows the user to mount or unmount a TIKKA type headlamp on a helmet any time, and keeps the option of adjusting the tilt of the headlamp.
8mm Delta Triangular Maillon Rapide with Bar
8mm Delta (Triangular) Shape Galvanised Mild Steel Maillon Rapide (Quick link) with Bar to ensure that there is no accidental opening of the connector. Suitable for three-way loading.
Old Version - For Petzl Vertex and Alveo helmets manufactured before 2019
Petzl Reflective Helmets Stickers
A page of four pre-cut reflective stickers for increased visibility. The pre-cut stickers are designed to fit on the front, back and side of the Petzl Vertex and Alveo helmets increasing all round visibility.
Petzl Spare headband for the PIXA® Range
Spare headband with mounting plate for headlamps from the PIXA line. Compatible with the PIXA 1, PIXA 2, PIXA 3, PIXA 3R and PIXA Z1 headlamps.
Petzl Oxan Screw Lock Oval Steel Karabiner
The Petzl Oxan high strength steel karabiner is designed for use in difficult environments.The oval, symmetrical shape allows optimal loading of the karabiner when setting up anchors or connecting to metal structures.
Reflective stickers for VERTEX helmet
Reflective pre-cut stickers for increased visibility of VERTEX helmets.
Petzl storage bag to protect VERTEX and STRATO helmets
Storage bag to protect VERTEX and STRATO helmets during storage and transport. Thanks to a closed interior compartment, accessories are also protected.
Reflective stickers for STRATO helmet
Reflective stickers for increased visibility of STRATO helmets.
Petzl Spirit Curved Karabiner
The SPIRIT karabiner is the benchmark for sport climbing and working routes. The design of the bent gate allows the rope to be stabilized and clipped efficiently. The H-shaped cross-section reduces the weight of the karabiner to 39g.
Petzl Spirit Straight Snapgate Karabiner
The SPIRIT karabiner is the benchmark for sport climbing and working routes. The straight gate design offers an excellent grip and makes clipping and unclipping easier thanks to its textured gate and Keylock system. The H-shaped cross-section reduces the weight of the karabiner to 39g.