Petzl Absorbica Y MGO European version

Double lanyard with integrated energy absorber and MGO connectors.

Absorbica Y MGO is a double lanyard with compact energy absorber, designed for progression on a vertical structure or a horizontal lifeline and when passing intermediate anchors. It is available in two lengths: 80 or 150 cm versions (without connectors). The 150 cm version has elasticized arms, to avoid hindering progression. With two MGO large-opening connectors, it is certified to European and Russian standards.

Petzl STEF Tilting device for NEST litter

The STEF tilting device joins the three connection points of the NEST litter and allows it to be easily tilted according to the terrain. It has three Am’D TRIACT-LOCK connectors for automatic locking of the connection points, and a swivel for precise orientation of the litter.

Petzl STEF for NEST litter before 2020

The STEF tilting device joins the three connection points of the NEST litter and allows it to be easily tilted according to the terrain. It has three Am’D TRIACT-LOCK connectors for automatic locking of the connection points, and a swivel for precise orientation of the litter.

Petzl Absorbica Y Tie-Back

The ABSORBICA-Y TIE-BACK is a double lanyard with integrated intermediate tie-back rings and compact energy absorber. It is designed for vertical progression on very large structures and when passing intermediate anchor points. The TIE-BACK system allows the lanyard ends to be reconnected to fit around structures with a very large cross section. The arms are elasticized to avoid hindering progression. It is available with or without connectors and is certified to North American, European and Russian standards.

Petzl Bag for Nest Litter

The bag for the NEST litter allows it to be transported and stored. The openings at either end allow the handles of the litter to protrude, for easier handling. It is equipped with three handles and a bandolier system for easier transport.

Petz Nest Confined Space Stretcher

The NEST litter was developed in partnership with the French national caving rescue organization. It allows a victim to be transported horizontally, vertically or at an angle. It is easy to manipulate and simplifies installation of a victim. It is suitable for all technical rope rescue, particularly in confined spaces.

Petzl Equipment holder for Canyon Club harness

The equipment holder for the CANYON CLUB harness provides additional racking options, making it easy for the guide to stow the karabiners of the DUAL CANYON CLUB lanyard. It connects to the waistbelt webbing of the harness.

Petzl VOLT® Harness International Version

Fall arrest and work positioning harness.

The VOLT fall-arrest and work positioning harness is very easy to don, thanks to the FAST LT PLUS automatic buckles that allow the harness to be donned with feet on the ground. Wide, semi-rigid waistbelt and leg loops give excellent support. Its lightweight, breathable construction maximises air flow. It features a textile dorsal attachment point designed for connecting a self-retracting fall-arrest system. It is certified to U.S. and European standards.

Petzl VOLT® Harnesses European version

Fall arrest and work positioning harness with attachment point for vertical progression on rail or cable.

The fall arrest and work positioning VOLT harness is very easy to don, thanks to the FAST LT PLUS and FAST LT automatic buckles that allow it to be donned with feet on the ground. Wide, semi-rigid waistbelt and leg loops give excellent support. Its lightweight, breathable construction maximises air flow. Its LADDER CLIMB attachment point allows for ventral attachment of the fall-arrest trolley, ensuring optimal comfort during progression. It is certified to European and Russian standards.

Petzl VOLT® WIND Harness European Version

Fall arrest and work positioning harness for the wind power industry with attachment point for vertical progression on rail or cable.

The VOLT WIND fall-arrest and work positioning harness is very easy to don, thanks to the FAST LT PLUS and FAST LT automatic buckles that allow the harness to be donned with feet on the ground. Wide, semi-rigid waistbelt and leg loops give excellent support. Its lightweight, breathable construction maximizes air flow. Its LADDER CLIMB attachment point allows for ventral attachment of the fall-arrest trolley, ensuring optimal comfort during progression. It has wear protectors on the waistbelt and dorsal point to limit wear when moving about inside the wind turbine tower. It is certified to European and Russian.

Petzl VOLT® WIND international version

Fall arrest and work positioning harness for the wind power industry.

The VOLT WIND fall-arrest and work positioning harness is very easy to don, thanks to the FAST LT PLUS automatic buckles that allow the harness to be donned with feet on the ground. Wide, semi-rigid waistbelt and leg loops give excellent support. Its lightweight, breathable construction maximizes air flow. It features a textile dorsal attachment point designed for connecting a self-retracting fall-arrest system. It has wear protectors on the waistbelt and dorsal point to limit wear when moving about inside the wind turbine tower. It is certified to U.S. and European standards.

Petzl Seat for Volt harnesses

The seat for the VOLT harness attaches to the designated slots on the harness. It provides increased comfort during prolonged suspension.

Petzl Canyon Guide Harness

The Canyon Guide is a comfortable harness designed for expert users and guides. It features a gated ventral attachment point that allows the optimal integration of equipment. The gear loops and secondary loops make it easy to carry gear in any situation (progressing, organising packs, rescue...). The protective seat is durable and interchangeable, and effectively protects the wetsuit and harness webbing from abrasion. The stainless steel DOUBLEBACK buckles, the metal attachment point and the reinforced gear loops optimise durability, for intensive use. The harness’s identification panel is also reinforced, for tracking the harness throughout its lifespan.

Petzl Dual Canyon Club Lanyard

Designed for canyoning, the DUAL CANYON CLUB is an easy-to-use lanyard designed for groups. It allows progression on a lifeline with intermediate anchors, and positioning at an anchor. It attaches easily to the CANYON CLUB harness with a simple girth hitch. The plastic sheaths hold the carabiners in position and protect the stitching from abrasion.

Petzl Dual Canyon Guide Lanyard

Designed for canyoning, the DUAL CANYON GUIDE is an easy-to-use lanyard designed for expert users and guides. It allows progression on a lifeline with intermediate anchors, and optimal positioning at an anchor. It attaches directly to the pin of the gated attachment point on the CANYON GUIDE harness. The ADJUST rope adjuster's ergonomic shape offers simple, quick adjustment. The plastic sheaths hold the karabiners in position and protect the stitching from abrasion.

Petzl Canyon Club Harness

Designed for canyoning, the Canyon Club is an easy-to-use harness for groups. It is easy to put on and adjust, and has a single attachment point, making it easy for the guide to equip a group. The protective seat is durable and interchangeable, and effectively protects the wetsuit and harness webbing from abrasion. The attachment point and gear loops are reinforced for excellent durability, even during intensive use. The harness's identification panel is also reinforced, for tracking the harness throughout its lifespan. Numerous accessories (protective seats in different colours, removable foam and equipment holders) are available for personalising equipment and improving comfort, depending on need.

Petzl Protective seat for Canyon harnesses

The protective seat is designed for CANYON CLUB and CANYON GUIDE harnesses. It is durable and interchangeable and effectively protects the wetsuit and harness webbing from abrasion.

Available in three colours, in order to personalise the equipment and easily differentiate groups.

Petzl Cutaway sling for CANYON CLUB harness

The cutaway sling for the CANYON CLUB harness allows a person to be quickly freed from a blockage, without damaging the harness or the rope. It is easy to install with a girth hitch on the harness attachment point.

Petzl Cutaway sling for CANYON GUIDE harness

The cutaway sling for the CANYON GUIDE harness allows a person to be quickly freed from a blockage, without damaging the harness or the rope. It attaches directly to the harness’s gated attachment point, limiting bulk.

Petzl Comfort foam for Canyon Club harness

The comfort foam for the CANYON CLUB harness improves comfort during long suspensions. It fits onto the waistbelt webbing of the harness.

Petzl Maestro® L

Descender with integrated progress-capture pulley for loads up to 280 kg, compatible with 12.5 to 13 mm ropes.

MAESTRO L is a descender designed for technical rescue operations. It facilitates manipulation of heavy loads, for lowering or hauling, and may be used in both the primary system or in a back-up belay. This versatility allows rescuers to adapt to any situation they may encounter on the rescue scene. The ergonomic handle and integrated braking allow for comfortably controlled descent. Shifting from lowering position to hauling position is immediate, without the need to transfer the load. The integrated progress-capture pulley has a large diameter sheave mounted on sealed ball bearings, ensuring excellent hauling.

Skylotec Sirius Descender

SIRIUS packs the advantages of the best descenders for industrial and rescue applications into an extremely compact design - for better handling and long service life.

Petzl Maestro® S

Descender with integrated progress-capture pulley for loads up to 250 kg, compatible with 10.5 to 11.5mm ropes.

MAESTRO S is a descender designed for technical rescue operations. It facilitates manipulation of heavy loads, for lowering or hauling, and may be used in both the primary system or in a back-up belay. This versatility allows rescuers to adapt to any situation they may encounter on the rescue scene. The ergonomic handle and integrated braking allow for comfortably controlled descent. Shifting from lowering position to hauling position is immediate, without the need to transfer the load. The integrated progress-capture pulley has a large diameter sheave mounted on sealed ball bearings, ensuring excellent hauling.

Harken CLUTCH™ Multi-purpose Rope Travel Device

A multi-purpose rope travel device engineered to assure rescuers and access professionals are prepared for the most situations possible.

The versatile CMC™ CLUTCH™ by Harken Industrial™ is a single wearable tool suited for efficient hauling, controlled lowering, smooth personal descent, easy ascending, and reliable progress capture. Not only does it replace the hardware used in a traditional raise/lower system for rescue operations, it also serves as a personal descender with the most efficient ascending capability of any product in its class. The CLUTCH enables more rope operations with one tool than anything we’ve ever evaluated. The CLUTCH is the result of the design and product engineering collaboration by two experts with a collective 90 year history in rope management under heavy loads; CMC, a company with roots in rescue and rope access and Harken Industrial, a manufacturing company with roots in high-performance sailing.

Petzl ID Evac Self-braking Descender

The I’D EVAC self-braking descender is primarily designed for lowering from an anchor. The ergonomic handle is specifically oriented for managing of a load from the anchor and offers comfortable descent control.

Petzl ID Evac Self-braking Descender Black

The I’D EVAC self-braking descender is primarily designed for lowering from an anchor. The ergonomic handle is specifically oriented for managing of a load from the anchor and offers comfortable descent control.

Petzl Fly Ultra-lightweight Harness

Designed for mountaineers and ski mountaineers, the FLY harness is Petzl’s most lightweight harness, and can be donned with both feet on the ground.

Petzl Pirana Friction Descender

PIRANA is an adjustable friction descender designed for canyoning. It has three rope installation options, to select the degree of friction before initiating a descent. A friction spur allows braking to be increased during the descent. The plastic ring ensures appropriate connector positioning, to facilitate rope installation with the device remaining connected to the harness, limiting the risk of dropping it. A locking groove and an additional spur facilitate rapid creation of a tie-off.

Petzl Boreo Climbing Helmet

Durable and very versatile with enhanced protection for climbing and mountaineering. Thanks to its hybrid construction, the helmet is low-profile and has good head-coverage.

Protection against lateral, frontal and rear impact is reinforced. Optimized volume on the head and wide ventilation holes make it a comfortable helmet for all activities.

Petzl Borea Helmet

The BOREA is a durable, versatile helmet suitable for climbing, mountaineering, caving, via Ferrata, canyoning... The design allows it to be worn with a ponytail, making it especially suitable for women.

Thanks to its hybrid construction, the helmet is both low-profile and head-covering. Protection against lateral, frontal and rear impact is reinforced. Optimised volume on the head and wide ventilation holes make it a comfortable helmet for all activities.

Petzl Tour Lightweight Harness

The TOUR is a durable harness designed for glacier travel and ski-touring. Thanks to its simple structure, it can be donned while wearing skis or crampons.

Petzl MGO 110 Double Action Scaffold Hook With Open Captive Eye

Auto-locking directional connector with large gate opening, and a gated connection point.

MGO OPEN is an auto-locking directional connector with a large gate opening for connection to metal structures or to large-diameter cables and bars. It has a gated connection point for attachment to different types of lanyards. If the lanyard is damaged, the connector can thus be reused. MGO OPEN is available in two versions. Order.

Petzl Vulcan High-Strength Screwgate Karabiner

The VULCAN is a high-strength steel karabiner for setting up anchors, it can be used with the CAPTIV bar to favour positioning of the karabiner along the major axis, to limit the risk of it flipping and to keep it integrated with the device.

Petzl Vulcan Black High-Strength Screwgate Karabiner

The VULCAN is a high-strength steel karabiner for setting up anchors, it can be used with the CAPTIV bar to favour positioning of the karabiner along the major axis, to limit the risk of it flipping and to keep it integrated with the device.

Petzl Vulcan High-Strength Triact-Lock Karabiner - European

The VULCAN is a high-strength steel karabiner for setting up anchors, it can be used with the CAPTIV bar to favour positioning of the karabiner along the major axis, to limit the risk of it flipping and to keep it integrated with the device.

Petzl Vulcan High-Strength Triact-Lock Karabiner - International

The VULCAN is a high-strength steel karabiner for setting up anchors, it can be used with the CAPTIV bar to favour positioning of the karabiner along the major axis, to limit the risk of it flipping and to keep it integrated with the device.

Petzl Vulcan High-Strength Triact-Lock Black Karabiner - International

The VULCAN is a high-strength steel karabiner for setting up anchors, it can be used with the CAPTIV bar to favour positioning of the karabiner along the major axis, to limit the risk of it flipping and to keep it integrated with the device.

Petzl Connexion Fixe

Connexion Fixe Anchor strap is a durable anchor strap with two forged steel attachment points. It offers several configurations for setting up an anchorage directly on an anchor or around a suitable structure. It is available in three lengths (100, 150 and 200 cm).

Peztl Connexion Vario

CONNEXION VARIO is a durable and adjustable anchor strap equipped with two forged steel attachment points. It offers several configurations for setting up an anchorage directly on an anchor or around a suitable structure. The strap length is adjustable, thanks to an adjustment buckle. A system keeps the remaining webbing stowed. It is available in two versions (30 to 200 cm and 200 to 400 cm). 

Petzl Captiv Adjust

Karabiner positioning bar combined with an ADJUST rope adjuster

The Captiv Adjust positioning bar promotes loading of the karabiner on the major axis and helps hold the ADJUST rope adjuster in the proper position to reduce the risk of accidental release. It helps keep the lanyard and rope adjuster integrated with the karabiner, reducing the risk of losing them. Captiv Adjust is compatible with OK, Am'D, Bm'D and OXAN karabiners.

Petzl Accu Swift RL PRO

Rechargeable battery for SWIFT RL PRO headlamp.

High-capacity Lithium-Ion 2350 mAh rechargeable battery for the SWIFT RL PRO headlamp. It guarantees excellent lighting performance, even at low temperatures. It charges directly via built-in micro USB port and has a charging indicator light.

Petzl Tactikka Adapt

TACTIKKA headlamp without headband and with mounts for use on any type of helmet. 300 lumens.

TACTIKKA ADAPT is a ready-to-go lighting solution for use on any type of helmet. It consists of a TACTIKKA headlamp without a headband, a FIXATION TACTIKKA clip mount, and a KIT ADAPT adhesive mount. Designed for activities where stealth is key, the TACTIKKA headlamp offers 300-lumen brightness and a flood beam for proximity lighting and brief movement. It also has red lighting to preserve night vision and ensure stealth. TACTIKKA comes with three standard batteries and is also compatible with the CORE rechargeable battery, thanks to its HYBRID CONCEPT design.

Petzl Absorbica

The Absorbica is a compact energy absorber, for use in combination with a JANE lanyard to make a fall arrest lanyard. Equipped with tear-webbing inside a pouch that opens on each end, the absorber is protected from abrasion, while allowing for regular inspection. It has two options for installation on the harness, according to the frequency of manipulation.

Petzl Absorbica-I Single lanyard with integrated energy absorber

ABSORBICA-I is a single lanyard with compact energy absorber designed for progression on a horizontal lifeline (rope or cable) or on an elevated platform, without passing intermediate anchors. It has several installation options on the harness and can be used with different types of connectors. It is available in two lengths: 80 or 150 cm versions (without connectors). The 150 cm version has an elasticized arm, to avoid hindering progression. Depending on the connectors used, ABSORBICA-I is certified to American, European and Russian standards.

Petzl Absorbica-Y Double lanyard with integrated energy absorber

ABSORBICA-Y is a double lanyard with an integrated energy absorber, designed to protect the initial ascent when putting up a working rope. It is available in two lengths: 80 or 150 cm versions (without connectors). The 150 cm version has elasticized arms, to avoid hindering progression. Depending on the connectors used, the ABSORBICA-Y is certified to American, European, and Russian standards.

Petzl Absorbica I Vario Adjustable single lanyard with integrated energy absorber

Absorbica I Vario is an adjustable single lanyard with compact energy absorber designed for progression on a horizontal lifeline (rope or cable) or on an elevated platform, without passing intermediate anchors. It features the VARIO adjustment system, allowing the lanyard length to be adjusted in order to reduce the potential fall height. Depending on the connectors used, Absorbica I Vario is certified to North American, European and Russian standards.

Petzl Altitude Lightweight Mountaineering Harness

The ALTITUDE is a very lightweight harness designed for mountaineering and ski touring. Thanks to its simple structure, it can be donned while wearing skis or crampons. The two gear loops and the retainers help organise and transport the equipment required for mountain activities.

Petzl Progress Adjust-I positioning lanyard

Progress Adjust-I positioning lanyard, when used in addition to a fall arrest device, enables comfortable positioning at a workstation when the user has support for the feet. Thanks to the ADJUST rope adjuster, the length can be quickly and easily adjusted. The CAPTIV ADJUST and STUART accessories help hold the connectors in a good position for easy clipping. Depending on the configuration, it can be used in single or double mode. The PROGRESS ADJUST-I positioning lanyard is available in three lengths (2, 3 and 5 m). 

Petzl Absorbica Y MGO International version

Absorbica Y MGO is a double lanyard with compact energy absorber, designed for progression on a vertical structure or a horizontal lifeline and when passing intermediate anchors. It is available in two lengths: 80 or 150 cm versions (without connectors). The 150 cm version has elasticized arms, to avoid hindering progression. Equipped with two large-opening MGO connectors and a Bm’D connector with a CAPTIV positioning bar, it is certified to American, European and Russian standards.

Petzl Astro Bod Fast International Harness

The Petzl Astro Bod Fast harness with an integrated croll has been designed for greater efficiency and
comfort during rope ascents. Wide, semi-rigid waistbelt and leg loops give excellent support. They are contoured and lined with breathable foam padding for comfort when suspended.

Skylotec Milan 2.0 Hub

The Skylotec Milan 2.0 Hub is one of the world's most popular auto controlled rate rescue devices, which enables two people to be evacuated simultaneously from a structure, be that a wind turbine, tower crane, telecomms mast etc.

Portable Deadweight Trolley

Designed for use in industrial rope access and for fall arrest purposes, the deadweight trolley is a portable anchor device for use behind structural handrails, balustrades and parapet walls.

Harken Riggers Rope Access Winch 500

The Harken riggers rope access winch is a lightweight CE certified portable winch that can be supplied with or without a drill adapter

Hydrajaws Model 2000 Deluxe ‘Digital Bluetooth System’ Anchor Pull Tester

Hydrajaws revolutionary digital technology captures test results using an Android OS Mobile device (iphone IOS software available soon), allowing for instant visual graphs onsite for anchors, eyebolts and lifelines.

Rock Exotica Enforcer Loadcell

The Rock Exotica Enforcer is a compact aluminium load cell that measures force up to 20 kN. Utilizing two sampling modes, the Enforcer is able to monitor systems and log drop testing in high resolution. Unique features like Bluetooth connectivity and swivel attachment points separate the Enforcer into a class of its own.

IMPORTANT NOTICE: For use with iPhone IOS operating system only, (The app is not available on Android).

ClimbTech Bantam Beamer Sliding I-Beam Anchor

A removable and reusable sliding I-beam anchor, easy to place and remove. This anchor is designed to easily glide along the beam while trailing the worker. This can be used at both overhead and foot level heights.

DMM Revolver Rig Single Pulley Locksafe Karabiner

The DMM Revolver Rig brings industrial strength and performance to a innovative pulley wheel-connector. This incredibly versatile connector can be used in any running rope system to increase efficiency.

Kask Super Plasma PL Helmet

This lightweight vented Kask Super Plasma PL Helmet is compact and comfortable. Complying with EN12492, this new hi-tech helmet has been specifically designed for professional work and rescue applications.