Portable Deadweight Trolley
Designed for use in industrial rope access and for fall arrest purposes, the deadweight trolley is a portable anchor device for use behind structural handrails, balustrades and parapet walls.
SAS A-Frame Deadweight Anchor
The A Frame Deadweight Rope Access Anchor is suitable for use on flat roof surfaces behind a parapet wall, with a minimum height of 300mm and a maximum height of 1.8m.
Irudek Orbyt Deadweight Anchor
Deadweight anchor point with a revolutionary design, consisting of ten 25 kg counterweights and a base part with two rotating anchorage rings.
Ideal for use on roofs with a maximum slope of 5º.
Setting up anchors is an important part of the industry and not to be taken lightly. At Abaris we stock a full range of equipment to allow for most site situations and the ability to test the safety and integrity of the anchors.
A guide to the Conformity Standards:
Safety Requirements for Personal Fall Arrest Systems, Subsystems and Components.
| EN566 | Mountaineering equipment. Slings. Safety requirements and test methods. |
| EN795 | Personal fall protection equipment. Anchor devices. |
| EN959 | Mountaineering equipment. Rock anchors. Safety requirements and test methods. |
| ANSI Z359.1-2007 | Safety Requirements for Personal Fall Arrest Systems, Subsystems and Components. |
| ANSI Z359.7-2011 | Qualification and Verification Testing of Fall Protection Products. |
| EAC | EurAsian Conformity marking confirms full compliance with the “Basic Safety Requirements”, which are specified in the Technical Regulations. |
| CEN/TS 16415 | Personal fall protection equipment. Anchor devices. Recommendations for anchor devices for use by more than one person simultaneously. |
Buying Guides
We know that sometimes you need a little help with choosing the product that's right for you. We also know the typical questions our customers ask - so we've put together this comprehensive collection of buying guides, where we hope you'll find the answers buy clicking here.