Refine results
Refine by
Viewing 30 of 95.
grid
list
£7.56
(inc. VAT)

Petzl Protective sheath for GRILLON

From £7.69
(inc. VAT)

Camp Goblin Lanyard

A 26cm or 40cm lanyards to be used in conjunction with a Camp Goblin fall arrest device. Supplied with a FREE Camp Goblin Rope Surfer.

SPECIAL ORDER ITEM - please contact us for lead times

£9.90
RRP £9.95
Save £0.05
(inc. VAT)

G-Force Elasticated Tool Lanyard For Power Tools 1.3 metre

Heavy duty elasticated tool lanyard for heavier tools such as drills, grinders and chainsaws.

From £14.00
(inc. VAT)

Petzl Joko I (Single) Lanyard

Petzl Joko I Lanyard is designed and ideal for use in adventure parks, perfect as the connection between the harness and the pulley on a tyrolean or zipline.

£14.95
(inc. VAT)

Palm Water Rescue Cowtail One

An elasticated attachment for use with personal floatation device harness systems. It does not come with karabiners to allow for a variety of uses.

£16.93
(inc. VAT)

Beal Mobile Lanyard

The MOBILE-LANYARD is certified to work with the MONITOR mobile fall arrest device, enabling it to be positioned away from the operator. 

From £17.45
(inc. VAT)
£18.54
(inc. VAT)

Beal Air Leash Tool Lanyard

Beal Air Leash Tool Lanyard, extendable gear leash which allows tools to remain attached whilst in use.

From £19.20
(inc. VAT)

Singing Rock Industrial Cow's Tail 4m or 5m Lengths

Singing Rock Industrial Cow's Tail 11 mm dynamic rope to create lanyards using figure eight knots according to IRATA recommendations.

£19.32
(inc. VAT)

Petzl Spirit Express quickdraw

Petzl Spirit Express quickdraw with Spirit straight and bent gate Karabiners

From £20.40
(inc. VAT)

Petzl Jane Non-adjustable Rope Lanyard

Petzl Jane Lanyard is a dynamic non-adjustable rope lanyard, with terminations on each end, designed for work restraint systems. It can also be combined with a Petzl Absorbica energy absorber to make a fall arrest lanyard.

From £21.00
(inc. VAT)

Lyon Industrial Cowstail 4m or 5m Lengths

A basic dynamic rope that conforms to EN892 produced by beal for Lyon. Suitable for a range of applications. This rope is supplied as a hanked bundle colours vary. Length 4m or 5m length, Diameter 11mm. 

From £21.25
(inc. VAT)

Petzl ANGE FINESSE

Ultra-light quickdraw

Designed for alpine climbing and situations where every gram counts, the ANGE FINESSE quickdraw is ultra-light, compact and durable. Featuring Petzl's MonoFil Keylock technology and an H-shaped cross-section, ANGE karabiners are very lightweight and offer an optimal strength/weight ratio. Strong and ergonomic, the FINESSE sling provides a good grip. The STRING quickdraw sling protector maintains the proper orientation of the karabiner making it easier to clip. Available in two lengths and two karabiner sizes.

£22.00
(inc. VAT)

Beal Dyna Connexion

Beal Dyna Connexion, Sewn dynamic rope sling to shortlink into a belay, facilitate abseils, but also to extend a runner whilst climbing. 40cm - 80cm

£22.40
(inc. VAT)

Beal Dynamic Rope Lanyard

This dynamic lanyard is greatly superior to that of traditional static lanyards : The security of the operator is improved in the event of a fall on the lanyard because the dynamic rope hugely reduces the impact force. In conformity with the instructions, this lanyard meet Standard EN354.

From £22.50
(inc. VAT)

Stainless Steel Wire Lanyards with Copper Ferrules

Stainless Steel Wire Lanyard with copper ferrules. Suitable for use in environments where corrosion might be an issue such as offshore. Available in 3 sizes as standard but other lengths available on request. 

PLEASE NOTE: Connectors NOT included.

£23.80
(inc. VAT)

Ridgegear 2m Adjustable Work Restraint Lanyard

Ridgegear RGL12 adjustable work restraint lanyard. 2m in length supplied with various types of connectors please choose below. 

£24.20
(inc. VAT)

Beal Dynapark Belay Lanyard

Beal Dynapark Lanyard - For use on rope courses, made from dynamic rope with sewn terminations. This dynamic lanyard offers better security than static lanyards.

£24.85
(inc. VAT)

Beal Super Leash

The Beal Super leash is a elasticated tool safety lanyard, designed to prevent tools and equipment falling from height and causing injury.

£25.00
(inc. VAT)

Beal Dynamic Pro V Rope Lanyard

This dynamic lanyard is greatly superior to that of traditional static lanyards : The security of the operator is improved in the event of a fall on the lanyard because the dynamic rope hugely reduces the impact force. In conformity with the instructions, this lanyard meet Standard EN354.

From £28.98
(inc. VAT)

Petzl Joko Y double Lanyard

Petzl Joko Y Lanyard is designed and ideal for use in adventure parks, perfect for passing internediate anchor points or even as the connection between the harness and the pulley on a tyrolean or zipline. 

£29.05
(inc. VAT)

Petzl Dual Canyon Club Lanyard

Designed for canyoning, the DUAL CANYON CLUB is an easy-to-use lanyard designed for groups. It allows progression on a lifeline with intermediate anchors, and positioning at an anchor. It attaches easily to the CANYON CLUB harness with a simple girth hitch. The plastic sheaths hold the carabiners in position and protect the stitching from abrasion.

£29.40
(inc. VAT)

May only be used with the Petzl ASAP and Petzl ASAP Lock fall arrester.

Petzl Asap’sorber 20cm

The Petzl Asap’sorber 20cm is designed for use with the Petzl ASAP or Petzl ASAP Lock. It allows the user to work at a distance from the back-up rope, thus protecting it from damage. .

From £29.50
(inc. VAT)

Lyon Adjustable Rope Lanyard

Adjustable Rope Lanyard - Made from 11mm Low Stretch Rope, these lanyards offer the user the flexability to adjust the lanyard length to suit their specific requirements. 

From £33.66
RRP £39.60
Save £5.94
(inc. VAT)

Skylotec lory X

Replacement rope for Skylotec Lory X

£34.68
RRP £40.80
Save £6.12
(inc. VAT)

The Petzl absorbica is a compact energy absorber, for use in combination with a Jane lanyard to make a fall arrest lanyard. Equipped with tear-webbing inside a zippered fabric pouch, the energy absorber is protected from abrasion while allowing for regular inspection. It has two options for installation on the harness according to the frequency of manipulation.

£34.80
(inc. VAT)

May only be used with the Petzl ASAP and Petzl ASAP Lock fall arrester.

Petzl Asap’sorber 40cm

The Petzl Asap’sorber 40cm is designed for use with the Petzl ASAP or Petzl ASAP Lock. It allows the user to work at a distance from the back-up rope, thus protecting it from damage. 

£34.93
(inc. VAT)

SAR Rocker 10cm Lanyard Assembly

Our Rocker Sling Assembly is made using our Twin Eye slings have a test strength of 24kN. This conforms to the highest standards set by EN354 of 22kN. The Gator karabiners are made from high grade alloy, formed from round bar then pressed to shape to give extra strength.

They have a key lock on the nose and gate to stop web catching.

£38.77
(inc. VAT)

Abtech Adjustable Restraint Lanyard

Adjustable Reatraint Lanyard - Designed to restrict the users movements, to prevent a fall this lanyard offer the user the flexability to adjust the lanyard length to suit their specific requirements.

£39.60
(inc. VAT)

Petzl Asap’sorber Axess

The Petzl Asap’sorber Axess is designed for use with the Petzl ASAP or Petzl ASAP Lock. It allows the user to work at a distance from the back-up rope, thus protecting it from damage. Unlike the Petzl Asap’sober 20cm and 40cm versions, the Petzl Asap’sorber Axess gives a 250kg two-person rescue capacity. The Asap’sorber Axess replaces the L57.

There are many different types of lanyard, with the main industrial versions fitting into 3 categories: Work Restraint, Fall Arrest and Work Positioning. A work restraint lanyard is designed to restrain the user so that they cannot get into a position where they can take a fall. If there is any possibility of a fall, then a fall arrest lanyard should be used.

Fall arrest lanyards are equipped with a shock absorbing section which will limit the force exerted on the user during a fall. In UK, EN355 requires energy absorbers to have a minimum tensile strength of 15kN and to limit the maximum impact force to 6kN. Work Restraint becomes Work Positioning the moment when the user of the lanyard start to rely on the lanyard to maintain their work position.

When using fall arrest lanyards, attention should be made to the distance below the anchor point and the ground, to ensure there is enough clearance for the lanyard to successfully, and if necessary, fully deploy, before any part of the user makes contact with the ground.

A guide to the Conformity Standards:

EN354Personal protective equipment against falls from a height. Lanyards
EN355Personal protective equipment against falls from a height. Energy absorbers
EN358Personal protective equipment for work positioning and prevention of falls from a height. Belts for work positioning and restraint and work positioning lanyards
EN362Personal protective equipment against falls from a height. Connectors
EN567Mountaineering equipment. Rope clamps. Safety requirements and test methods
EN12841Personal fall protection equipment. Rope access systems. Rope adjustment devices
EACConformity for Custom Union Countries
ANSI Z359.3American National Standards Institute - Safety Requirements for Lanyards and Positioning Lanyards
ANSI Z359.12American National Standards Institute - Connecting Components for Personal Fall Arrest Systems
ANSI Z359.13American National Standards Institute - Personal Energy Absorbers and Energy Absorbing Lanyards
NFPANational Fire Prevention Association
CSA Z259.11Canadian Fall Protection Standard


Buying Guides

We know that sometimes you need a little help with choosing the product that's right for you. We also know the typical questions our customers ask - so we've put together this comprehensive collection of buying guides, where we hope you'll find the answers buy clicking here.