Refine results
Refine by
Featured
Viewing 25 of 25.
grid
list
From £3.80
(inc. VAT)

Lyon 18mm Nylon (Polyamide) Sewn Sling

The Lyon Nylon Sling offer the climber exceptional value for money without any compromise to strength and handling. The shorter slings are ideal for use as Quickdraws when combined with two carabiners, and the longer ones are invaluable for setting up belays, throwing over spikes or wrapping around blocks when you're out trad climbing. 

From £3.85
(inc. VAT)

Lyon 25mm Nylon (Polyamide) Sewn Sling

The Lyon Nylon Sling offer the climber exceptional value for money without any compromise to strength and handling. The shorter slings are ideal for use as Quickdraws when combined with two carabiners, and the longer ones are invaluable for setting up belays, throwing over spikes or wrapping around blocks when you're out trad climbing.

From £7.80
(inc. VAT)

Lyon 25mm nylon sling with protective sleeve

The nylon sleeve which is sewn into place provides additional protection from abrasion in high wear areas. Conforming to EN795B for anchorage devices these slings are perfect for making temporary rope anchors. 

£9.20
(inc. VAT)

Spanset Attachment Sling 1m

Spanset 50mm polyester sling surrounded with a protective tubular sleeve. This sling has been designed and tested to be part of a fall arrest system; this means that the sling is strong enough to be used to secure your equipment to the structure in the event of a fall.

From £14.50
(inc. VAT)

IMPORTANT NOTICE: These are EN795 PPE Anchor Strops NOT EN13414 lifting slings.

Lyon Wire Anchor Strops

Made from 7mm galvanised steel, complete with eyelet ends and plastic protective sleeve. 

From £21.00
(inc. VAT)

IMPORTANT NOTICE: These are EN795 PPE Anchor Strops NOT EN13414 lifting slings.

Lyon 7mm Stainless Steel Wire Anchor Strop

The stainless steel wire slings / strops have the same physical dimensions and handling properties as the galvanised versions, but with reduced spark potential and increased corrosion resistance. 

£21.73
(inc. VAT)

Petzl Coeur Steel Hanger 10mm - 20 Pack

Multi-directional, steel hanger plate 10mm with anti-rotation system. Standard steel designed for interior uses or non-permanent installations. Pack of 20

£21.73
(inc. VAT)

Petzl Coeur Steel Hanger Plate 12mm - 20 Pack

Multi-directional, steel hanger plate 12mm with anti-rotation system. Standard steel designed for interior uses or non-permanent installations. Pack of 20

£38.26
(inc. VAT)

Please note! This item is not available for export. 

Petzl Collinox Resin Glue

Please note! This item is not available for export.

AMPOULE Collinox Resin Glue. Required for placing the COLLINOX anchor. Box of 10.

£46.37
(inc. VAT)

Petzl Coeur Stainless Steel Hanger 12mm - 20 Pack

Multi-directional, stainless steel hanger plate 12mm with anti-rotation system. Stainless steel designed for typical exterior use. Pack of 20

£46.37
(inc. VAT)

Please note! This item is not available for export.

Petzl Batinox Resin Glue

Required for placing the Batinox anchor. Box of 10. Not available for export.

£46.37
(inc. VAT)

Petzl Coeur Stainless Steel Hanger 10mm - 20 Pack

Multi-directional, Stainless steel hanger plate 10mm with anti-rotation system. Stainless steel designed for typical exterior use. Pack of 20

£57.96
(inc. VAT)

Petzl Coeur Goujon Complete steel anchor assembly 10mm - 20 Pack

Multi-directional, steel hanger plate with expansion bolt 10mm, with anti-rotation system. Standard steel designed for interior uses or non-permanent installations. Pack of 20

£64.97
(inc. VAT)

Petzl Coeur Goujon Complete steel anchor assembly 12mm - 20 Pack

Multi-directional, steel hanger plate with expansion bolt 12mm, with anti-rotation system. Standard steel designed for interior uses or non-permanent installations. Pack of 20

£133.31
(inc. VAT)

Petzl Coeur Goujon Complete Stainless Steel anchor assembly 10mm - 20 Pack

Multi-directional, Stainless steel hanger plate with expansion bolt 10mm, with anti-rotation system. Stainless steel designed for typical exterior use. Pack of 20

£141.42
(inc. VAT)

Petzl Collinox 10 mm resin anchor - Pack of 10

The Petzl Collinox is a 10mm diameter forged stainless steel anchor designed for for long-term installation. Textured stem for better application and adhesion of resin fixing.

Pack of 10.

£157.56
(inc. VAT)

Petzl Coeur Goujon Complete Stainless Steel anchor assembly 12mm - 20 Pack

Multi-directional, Stainless steel hanger plate with expansion bolt 12mm, with anti-rotation system. Stainless steel designed for typical exterior use. Pack of 20

£170.56
(inc. VAT)

Harken Roller Sling

The Harken Roller Sling is a mobile, wheeled anchoring system that keeps workers safely aligned to their working surface. Perfect for the Harken PowerSeat™ ascender.

£199.38
(inc. VAT)

Petzl Coeur HCR (High Corrosion Resistance) Hanger 12mm - 20 Pack

Multi-directional, HCR (High Corrosion Resistance) hanger plate 12mm with anti-rotation system. HCR steel designed for ultra-corrosive environments. Pack of 20.

£255.02
(inc. VAT)

Petzl Batinox Resin Fixing Anchor

Petzl Bat'inox 14 mm resin anchor. Especially suited for soft rock. Textured stem for better resin application and adhesion.

£613.21
(inc. VAT)

Petzl Coeur Goujon Complete HCR (High Corrosion Resistance) Steel anchor assembly 12mm - 20 Pack

Multi-directional, HCR (High Corrosion Resistance) hanger plate 12mm with anti-rotation system. HCR steel designed for ultra-corrosive environments. Pack of 20.

£908.40
(inc. VAT)

Rock Exotica Enforcer Loadcell

The Rock Exotica Enforcer is a compact aluminium load cell that measures force up to 20 kN. Utilizing two sampling modes, the Enforcer is able to monitor systems and log drop testing in high resolution. Unique features like Bluetooth connectivity and swivel attachment points separate the Enforcer into a class of its own.

IMPORTANT NOTICE: For use with iPhone IOS operating system only, (The app is not available on Android).

From £1,251.60
(inc. VAT)

Hydrajaws - Export Version

Hydrajaws Model 2000 ‘Deluxe Anchor Pull Tester - Export Version

The Hydrajaws model 2000 is used for pull testing a range of EN795 anchors. This export version has a removable gauge, gauges fitted with couplers can be returned separately and reduce the delivery costs. As standard our Deluxe kits come complete with adaptors for testing Petzl Coeur hanger plate expansion bolts. Optional extras include an adapter for eye bolt testing and ring bolt testing. Please contact us by phone if you require a pull tester for testing just eyebolts and ringbolts.

Non Stock Item! Each Hydrajaws is made to order. Leadtimes may vary (normally 5-7 working days). If your order is time critical then please contact us so we can confirm leadtime. Hydrajaws are special order items, non-returnable except for manufacturing fault.

From £1,366.80
(inc. VAT)

Hydrajaws Model 2000 Deluxe Master Anchor Pull Tester

The Hydrajaws model 2000 is used for pull testing a range of EN795 anchors. As standard our Deluxe and Deluxe Master kits come complete with adaptors for testing Petzl Coeur hanger plate expansion bolts. Optional extras include an adapter for eye bolt testing and ring bolt testing. Please contact us by phone if you require a pull tester for testing just eyebolts and ringbolts.

£2,064.00
(inc. VAT)

Hydrajaws Model 2000 Deluxe ‘Digital Bluetooth System’ Anchor Pull Tester

Hydrajaws revolutionary digital technology captures test results using an Android OS Mobile device (iphone IOS software available soon), allowing for instant visual graphs onsite for anchors, eyebolts and lifelines.

Rigging plates for equalizing load distribution.