Refine results
Refine by
Viewing 30 of 55.
grid
list
£13.00
(inc. VAT)

Beal Air Force 8

Classic, robust and easy to use belay device. It is compatible with a large range of rope diameters whether single, double or twin.
The friction can easily be varied whatever the condition of the ropes (frozen, wet, different diameters).

£13.52
(inc. VAT)

Petzl Huit Figure 8 Descender

Petzl Huit figure of 8 descender, for descending on single or double ropes.

£16.32
(inc. VAT)

Petzl Auxiliary Open Brake

The Petzl Auxiliary Open Brake is designed for I'D self-braking descenders. It may be used to increase the friction in accordance with the weight of the load and the diameter of the rope, or to release the rope at any time.

£16.32
(inc. VAT)

Petzl Auxiliary Closed Brake

The Petzl Auxiliary Closed Brake is designed for I'D self-braking descenders. It may be used to increase the friction in accordance with the weight of the load and the diameter of the rope, or to release the rope at any time.

£19.32
(inc. VAT)

Petzl Verso belay rappel device

Lightweight belay/rappel device for a broad range of single, half and twin ropes.

VERSO is Petzl's lightest belay device. It accommodates most rope diameters: single ropes 8.5 to 11 mm, half ropes 7.1 to 9.2 mm and twin ropes 6.9 to 9.2 mm. It is intuitive and easy to use in the gym or at the crag; well suited for learning how to belay. The specific design of the rope slots allows the rope to glide smoothly and reduces wear.

£21.50
(inc. VAT)

DMM Figure of 8

DMM Figure of 8 has been around for a long time and it is still very popular, Because it balances weight, strength, useable friction and heat control so well and is a true classic in every sense of the word.

£24.64
RRP £28.98
Save £4.34
(inc. VAT)

Petzl Pirana Figure of 8 Descender

A figure of 8 Descender with three different friction configurations. The rope can be installed without detaching the descender from the karabiner or karabiner from the harness. High strength forged aluminum.

£28.98
(inc. VAT)

Petzl Pirana Friction Descender

PIRANA is an adjustable friction descender designed for canyoning. It has three rope installation options, to select the degree of friction before initiating a descent. A friction spur allows braking to be increased during the descent. The plastic ring ensures appropriate connector positioning, to facilitate rope installation with the device remaining connected to the harness, limiting the risk of dropping it. A locking groove and an additional spur facilitate rapid creation of a tie-off.

£28.98
(inc. VAT)

Reverso Belay Device

The lightweight REVERSO is a multi-functional belay/rappel device designed for cragging, multi-pitch climbing and mountaineering. Reverso mode provides assisted-braking while belaying one or two seconding climbers from the top of a pitch.

It accommodates most rope diameters: single rope 8.5 to 10.5 mm, half ropes 7.1 to 9.2 mm and twin ropes 6.9 to 9.2 mm. The specific design of the rope slots allows the rope to glide smoothly and reduces wear.

£31.88
(inc. VAT)

Petzl Pirana Friction Descender

PIRANA is an adjustable friction descender designed for canyoning. It has three rope installation options, to select the degree of friction before initiating a descent. A friction spur allows braking to be increased during the descent. The plastic ring ensures appropriate connector positioning, to facilitate rope installation with the device remaining connected to the harness, limiting the risk of dropping it. A locking groove and an additional spur facilitate rapid creation of a tie-off.

£36.48
(inc. VAT)

SAR Rescue Figure of 8 Descender with Ears

Figure of 8 Descender with Ears is used for controlled lowering or abseiling. Manufactured from high strength aluminium alloy, it has a large eye with room for an extra karabiner and wings to prevent the rope rolling into a locked position.

£38.46
(inc. VAT)

ISC Rescue Figure of 8 Descender with Ears Stainless Steel

This Stainless Steel Figure of 8 Descender with Ears is used for controlled lowering or abseiling. Manufactured With a large eye with room for an extra karabiner and wings to prevent the rope rolling into a locked position.

£72.46
(inc. VAT)

Petzl Grigri belay device with assisted braking

Designed for the experienced belayer, the GRIGRI is a belay device with assisted braking designed for belaying both in the gym and at the crag. Compact and lightweight, it can be used with single ropes from 8.5 to 11 mm. The assisted braking function improves comfort while belaying, holding a climber or catching a fall. The design of the handled camming mechanism enables exceptional descent control.

£90.32
RRP £106.26
Save £15.94
(inc. VAT)

Petzl Grigri+ (Plus) Belay Device

It's a beefed up Grigri, which looks to have been designed with adventure parks, outdoor centres and places where the standard Grigri takes a hammering, in mind!

£107.10
(inc. VAT)
£115.92
(inc. VAT)

Petzl Stop Descender

Petzl Stop Descender is an assisted-braking descender designed for caving. It is used with 8.5 to 11 mm diameter low stretch kernmantel ropes. It improves descent control and facilitates rope maneuvers. The ergonomic handle makes for particularly comfortable grip and usability. Friction zones are stainless steel, to ensure great durability.

£120.88
RRP £142.20
Save £21.32
(inc. VAT)

Petzl Rig Self-braking Descender

The compact Petzl Rig descender featuring auto-locking has been primarily designed for rope access. However, it can also be used as a rescue descender (at an anchor), a releasable anchor and a belay device.

£125.00
(inc. VAT)

Camp Druid Compact Descender

A lightweight compact auto-braking descender for rope access and rescue designed for semi-static ropes ranging from 10 to 11 mm. Designed for expert users due to no anti-panic function

£127.18
(inc. VAT)

SAR A-B Descender

The A-B Descender has been designed for Technical Rope Access, Intervention/Special Forces and Rescue. It has been designed to overcome some of the problems that occur with other devices and comply fully, with the correct European Standard for this type of descender/rope adjustment device.

£130.56
RRP £153.60
Save £23.04
(inc. VAT)

Petzl Rig Black Self-braking Descender

The compact Petzl Rig Black descender featuring auto-locking has been primarily designed for rope access. However, it can also be used as a rescue descender (at an anchor), a releasable anchor and a belay device.
£135.00
(inc. VAT)

Camp Druid Compact Descender

A lightweight compact auto-braking descender for rope access and rescue designed for semi-static ropes ranging from 10 to 11mm

£138.53
(inc. VAT)

heightec Prism Descender

Please contact us for urgent orders.

This heightec descender is a high specification multi-function rope access descender.
Variable friction and high capacity rope access descender for abseiling, ascending, lowering, hauling and rescue.

£152.10
RRP £202.80
Save £50.70
(inc. VAT)

Skylotec Sirius Descender

The lightweight and compact Skylotec Sirius Descender has been primarily designed with industrial rope access and working at height in mind. The handle function features anti-panic and auto-locking and it’s packed with other really useful functions. It is also a certified rescue descender.

£167.34
(inc. VAT)

ISC D4 Descender

The D4 Descender features a unique and innovative progressive cam action, which offers precise control at slow or fast speed. The device 'fails to safe' (the device locks if the handle is released) and also has a panic brake feature (if the handle is pulled down in panic when in freefall then it locks the device - The progressive cam design means that this panic brake is not overly sensitive in normal use).

The device is made from a high grade aluminium and has a stainless steel cam, axles and top bobbin which should ensure a good degree of longevity. The beauty is that the internal workings are cleanable.

£167.34
(inc. VAT)

ISC D4 Descender Black

Limited stock available please contact us for large orders - Does not include the karabiner! (sold seperately)

The D4 Descender features a unique and innovative progressive cam action, which offers precise control at slow or fast speed. The device 'fails to safe' (the device locks if the handle is released) and also has a panic brake feature (if the handle is pulled down in panic when in freefall then it locks the device - The progressive cam design means that this panic brake is not overly sensitive in normal use).

The device is made from a high grade aluminium and has a stainless steel cam, axles and top bobbin which should ensure a good degree of longevity. The beauty is that the internal workings are cleanable.

£168.78
(inc. VAT)

heightec EGO Rope Access Descender

This heightec descender is a high specification multi-function rope access descender. Designed for abseiling, ascending, descent, hauling & rescue.

£172.90
RRP £203.40
Save £30.50
(inc. VAT)

Petzl I’D S Self-braking Descender

The Petzl I’D S descender featuring auto-locking and anti-panic functions has been primarily designed for rope access and working at height. However, it can also be used as a rescue descender (at an anchor), a releasable anchor and a belay device.

£182.58
RRP £214.80
Save £32.22
(inc. VAT)

Petzl I’D S Black Self-braking Descender

The Petzl I’D S Black descender featuring auto-locking and anti-panic functions has been primarily designed for rope access and working at height. However, it can also be used as a rescue descender (at an anchor), a releasable anchor and a belay device.

£219.60
(inc. VAT)

Petzl ID Evac Self-braking Descender

The Petzl I’D Evac descender featuring auto-locking and anti-panic functions has been designed for lowering from an anchor.

Designed for evacuation and rescue only.

£231.00
(inc. VAT)

Petzl I’D Evac Black Self-braking Descender

The Petzl I’D Evac Black descender featuring auto-locking and anti-panic functions has been designed for lowering from an anchor.

Designed for evacuation and rescue only.

A guide to the Conformity Standards:

EN341
Personal fall protection equipment. Descender devices for rescue.
EN12841 Personal fall protection equipment. Rope access systems. Rope adjustment devices.
EN1496Personal fall protection equipment. Rescue lifting devices.
EN15151
Mountaineering equipment. Braking devices. Braking devices with manually assisted locking, safety requirements and test methods.
ANSI Z359
Standard establishes the definitions and nomenclature used for fall arrest and fall protection.
EACEurAsian Conformity marking confirms full compliance with the “Basic Safety Requirements”, which are specified in the Technical Regulations.

Buying Guides

We know that sometimes you need a little help with choosing the product that's right for you. We also know the typical questions our customers ask - so we've put together this comprehensive collection of buying guides, where we hope you'll find the answers buy clicking here.