ClimbTech Bantam Beamer Sliding I-Beam Anchor

ClimbTech Bantam Beamer Sliding I-Beam Anchor
  • ClimbTech Bantam Beamer Sliding I-Beam Anchor
  • ClimbTech Bantam Beamer Sliding I-Beam Anchor
  • ClimbTech Bantam Beamer Sliding I-Beam Anchor
  • £179.32 Inc VAT
  • £149.43 Ex VAT

Lighter, smoother, and easier to use, Climbtechs Bantam Beamer I-Beam Super Slider Anchors are designed for fall protection, rope access and work positioning. Manufactured with a lightweight aluminium bar and bronze clamps this I beam has a 360° swivel and D-Ring connector. The clamps attach without tools to I-Beams either overhead or underfoot. Full description

MPN Code: CT101.2

  • Description
  • Specification
  • Delivery and Returns
Description

ClimbTech Bantam Beamer Sliding I-Beam Anchor

This ClimbTech portable adjustable super slider anchor device is designed for use on steel beams (RSJ beam, I beam or H beam)

The ClimbTech Bantam Beamer is a removable and reusable sliding I-beam anchor, easy to place and remove. This anchor is designed to easily glide along the beam while trailing the worker. This I-beam is adjustable from 90mm - 355mm  (3.5”-14”).

Installation:
1. Locate a structural steel beam flange capable of withstanding a 5,000-lbf. static load or
meeting OSHA 1926.502 requirements for a safety factor of two.
2. Push in on the latch handle to allow the adjustable hook to move.
3. Keeping the unit perpendicular to the beam, fit the hooks over the edges of the beam flange.
4. Slide the adjustable hook so that both hooks are snug against the beam flange.
5. Pull back the adjustable hook to ensure the ratchet teeth are fully seated in the nearest
ratchet notches.
6. Tug, rock, and twist the anchor in all directions to ensure that it cannot come off of the flange.
*Always re-adjust according to Installation steps 1-6 when moving to a new or different
sized beam.

Climbtech_Bantam-Beamer-Orientations

Climbtech part number: BWA014K

Performance:
Static tensile strength: 5000-lbf
(22kN) minimum.
Maximum capacity: one worker with
max weight of 310-lbs when used as
a single point anchorage connector
for personal fall arrest or restraint

Dimensions Regular:
Weight: 1.5kg
Beam flange width range: 90mm - 355mm (3.5”-14”)
Beam flange thickness:  6mm - 31mm (.25“ to 1.25”)
Regulatory compliance:
EN795, ANSI Z359.1-2007, ANSI Z359.7-2011
and OSHA 1926.502

FAQ's

1. How much does the Bantam Beamer weigh?
(A) 3.3-lbs. (1504g)
2. Does the Bantam Beamer comply with any safety standards?
(A) The Bantam Beamer complies with both OSHA 1910.66 and OSHA 1926.502.
It is also compatible with ANSI Z359.1-2007 and ANSI Z359.7-2011.
3. What is the breaking strength as tested by a 3rd party 17025 lab?
(A) The breaking strength of the Bantam Beamer meets ANSI standards
of 5,000 lbs (22kN).
4. What is the Bar made out of?
(A) 7075 T-6 Aluminum alloy.
5. What are the Paws made out of?
(A) The paws are made with 6061 T-6 Aluminum for a high-strength but lightweight
design. The paw inserts are a self-lubricating Silicone-Bronze alloy which is designed
to not bind on the beam.
6. How does the trigger mechanism work?
(A) The trigger mechanism can be activated from either side of the paws making it
easy to use even when wearing work gloves.
7. What is the benefit of the Swivel D-Ring?
(A) The swivel D-Ring mitigates connector rollout and rotates at a full 360º.
8. Can the Bantam Beamer be used overhead and at foot-level?
(A) Yes! As per the manual the Bantam Beamer can safely be used overhead
and at foot-level.
9. Are the Paw inserts replaceable?
(A) Not at this time.
10. What happened if the retaining ring on the Bantam becomes disconnected?
(A) Disengagement of the retaining ring has no negative impact on the safety or fall protection performance of the device.
The retaining rings are more for convenience than anything else and designed to easily break away in the event of a fall. They just keep the d-ring centered. Beam sliders which otherwise pass inspection and are in good working order, do not need to be decommissioned.

Specification

Specification

Anchors Beam Anchors
Delivery & Returns

Delivery Schedule and Details

We pride ourselves on our rapid service and aim to despatch all orders promptly. The majority of orders placed before 3pm Monday to Friday are sent out the same day as the order is received and delivered the next working day - See below for information on timed and weekend deliveries (This is dependent on stock availability, we will contact you on the rare occasion something is out of stock). Orders to the Highlands, Islands and Out of Area may be a two day delivery and overseas will be longer. For time-critical orders we advise calling us so we can process the order as a matter of urgency and confirm the delivery schedule. We cannot be held liable for any consequential loss caused by late delivery, or failure to deliver.

Please note that orders placed after close of business Monday to Thursday will be processed the next day. Orders placed after close of business on a Friday or at a weekend will be processed on the Monday.

If you opt for courier delivery you will receive an email or text on the day we dispatch your order informing you that it is enroute, and a further email or text at around 7:30am on the morning of the day of delivery, giving you a 1 hour window when your delivery will arrive.

Please allow slightly longer for the busier periods at Christmas and during the sales. All goods are subject to availability and in the event we are unable to supply your goods within thirty days you will be informed immediately and advised of the expected delivery date. Outstanding orders / items can be cancelled at any time. In instances where payment has already been made, an alternative or refund in full for the item(s) concerned will be given.

*Free delivery offers are limited to mainland UK and do not generally include the Highlands, Islands etc.

Timed deliveries / Saturday & Sunday deliveries
We are able to arrange timed deliveries (pre-1030am / pre-12) and deliveries at weekends (Saturday pre-1030am / pre-12 and Sunday anytime). Some of the timed delivery options are available via the website, for others including a Sunday delivery, please call the office for a confirmed price and to arrange the alternate delivery. Important Note: Timed deliveries are subject to stock availability (we will contact you if any of your order is not in stock so you can confirm if you would like us to split the delivery) and must be placed by 3pm Monday to Friday (after 3pm please call us as you may still be able to catch our couriers).

Low delivery charge guarantee
If you get to the basket stage of the order process and feel that our delivery charge is too high, then simply contact us and we will look to reduce this, possibly by opting for a slower delivery service (normal deliveries are next day - except for the highlands, islands etc)

Delivery Address
Goods will be delivered, by our appointed carrier, to the address given by you on the order form. It is important that this address is accurate. In most instances the parcel will not be left without a signature. If you ask for your delivery to be left somewhere without a signature then this is done at your own risk, we will not be liable for the theft / loss of your package. Please provide us with a delivery address where the parcel can be signed for between the hours of 8:00am and 6:00pm. We are happy to arrange delivery to your place of work if this is convenient. We cannot be held liable for any consequential loss caused by late delivery or failure to deliver by our appointed carrier.

Carriage Costs
You can view your carriage cost at the My Basket stage by simply entering your delivery postcode and country into the calculate delivery cost section. Should any goods delivered by us being damaged in transit, deficient of items shown on the delivery note or failing to match the items ordered by you, then you must notify us within 24 hours of receipt of your order. If we receive no such notification, you will be deemed to have accepted the items as satisfactory.

Collecting from store
Items can be collected from our store anytime from Monday to Friday from 9am to 5pm (excluding Bank Holidays and Christmas / New Year shutdown). Please call us to confirm the day and time you would like to collect so we can have your items and paperwork ready for your arrival. Weekend Collections - We aim to be as flexible as possible and are normally available to open at weekends for anyone wishing to buy / collect equipment on a Saturday or Sunday (we will endeavour to open the office, just call us to ensure it is possible on the day you wish).

Cancellation and Returns Policy - Non trade customers

We hope you will be completely satisfied with every purchase made from Abaris International Ltd as we strive to offer you excellent quality, value and service at all times. Whilst we try to be as flexible as possible with returns, we have to be aware of the safety critical nature of many of our products, and the need for us to guarantee the safety, quality, maintenance and storage of these products.

 

In line with all other professional suppliers of Personal Protective Equipment / Personal Fall Protection Equipment and for the safety of all our customers, we are ordinarily unable to exchange or issue a refund for any personal safety equipment such as ropes, harnesses, helmets, descenders, ascenders, karabiners etc once the items have left our premises, or in the case of orders sent out by post / courier, received by a customer. This does not apply to any item which has arrived faulty or damaged, or if the item has been dispatched as ordered, but is unwanted due to the description on the website being incorrect or misleading.

If we have sent you the wrong item please contact us as soon as possible (latest within 24 hours of receipt of your order), and subject to the time of day we are made aware of our error, we will endeavour to send the correct item out to you the same day, and arrange delivery of that item and collection of the wrong item the next day (slightly longer for Highlands and Islands and overseas). The item needs to be in its original and undamaged packaging and with its tags / labels still attached. We will not be able to accept return of any product that does not meet these criteria.

In certain other limited circumstances we may be willing to offer an exchange or refund, but need to be notified within 24 hours of you receiving the goods and require the product to be in exactly the same condition that it left us i.e. in its original and undamaged packaging and with the tags / labels still attached. If the tags / labels have been removed then the item is not returnable under any circumstances. Any goods accepted back for any other reason than we have made an error or the item is faulty, will be subject to a 15% inspection / re-certification fee, as we are required to complete a full PPE inspection on the item before it can be deemed suitable for resale, even when an item is returned to us unused and has seemingly not been removed from its packaging. Once the item has passed the formal inspection we will refund the cost of the goods minus the 15% inspection / recertification fee. Goods must be returned to us at your own expense and must be adequately packaged to protect against damage. If you fail to take reasonable care of the goods before they are returned to us, or have used insufficient packaging to return them to us and this results in damage or deterioration, the item will be returned back to you. We recommend that all items returned to us be sent recorded delivery with insurance paid as a minimum.

Customers who bought this item also showed interest in

Discontinued
ClimbTech I-Beam Anchors

ClimbTech Super Slider I-Beam Anchors

Lighter, smoother, and easier to use, Climbtechs I-Beam Super Slider Anchors are designed for fall protections, rope access and work positioning. Both models are constructed with lightweight aircraft aluminum bars and 360° swivel D-Ring connector. The clamps attach without tools to I-Beams either overhead or underfoot. Both Beam Anchor models are available in two sizes and have a breaking strength of 5,000 lbs. (22kN).

  • From £161.29 Inc VAT
  • From £134.41 Ex VAT
Abaris Adjustable Beam Clamp

G-Force Adjustable Beam Clamp

A portable adjustable EN795 beam anchor device, designed for use on steel RSJs, I and H beams.

  • £85.02 Inc VAT
  • £70.85 Ex VAT
  • RRP £101.98
Sala Glyder 2 Sliding Beam Anchor

Sala Glyder 2 Sliding Adjustable Beam Anchor

The DBI/SALA Glyder 2 is an adjustable EN795 beam anchor, designed for fall arrest and suspension (such as rope access). Easy fitting to I beams of between 8.75cm and 35cm, up to 3.125cm thick.

  • £344.40 Inc VAT
  • £287.00 Ex VAT
Rollclamp Personal Portable Anchor

Tractel Rollclamp Dover Clamp H and I Beam Anchor

The Tractel Rollclamp (Dover Clamp) anchorage device is designed to provide safety against falling for persons working on RSJ (H or I beam) metal structures and is intended for use with a lanyard with shock absorber or a Blocfor retractable lanyard.

  • From £394.32 Inc VAT
  • From £328.60 Ex VAT
Close

Items added to your compare list