Petzl Kootenay Pulley

Code: P67
£252.60
(inc. VAT)

Petzl Kootenay Knot-passing Pulley

The Petzl Kootenay is a high clearance, high efficiency pulley designed for passing joining knots. It’s designed for use on Tyrolean Traverses or long raises. It can also be used as a high strength anchor point.

Full description

Description

Petzl Kootenay Knot-passing Pulley


Key Features

  • Large diameter 76mm high strength thermoplastic (Polyoxymethylene) sheave
  • High clearance rope channel
  • Sealed ball bearings
  • Swing cheeks
  • Stainless Steel sheave immobilising pins
  • Strength – 10kN Working Load Limit (WLL)
  • Efficiency – 71%
  • Anchor point – 30kN
  • Breaking Load (MBS): 40kN

Warning: Remove the sheave immobilising pins before using as a pulley. 


Rope compatibility

Low stretch rope conforming to EN 1891 Type A or Dynamic rope to EN 892 with a diameter between 8mm-19mm


Cleaning

Wash and rinse in clean water using pure soap
+30°C / 86°F (max.)

Drying

Dry in a well-ventilated place away from direct sources of heat or sunlight.
+30°C / 86°F (max.)



 

Manufacturer's Downloads

 

Specification

Pulley

Pulley Type
Single
Pulleys Cheek
Swing Cheek
Pulley Wheel Material
Plastic
Pulley Rating (Breaking Load) kN
31-40kN
Pulley Efficiency
Bearing / High Efficiency
Minimum Rope Diameter (mm)
8mm
Maximum Rope Diameter (mm)
19mm
Working Load Limit (kN)
10kN
Max Breaking Strength (kN)
40kN

General

Industrial or Sport Use
Industrial
Conformity
CE EN12278
Weight (g)
1390g
Operating Temperature from
-40°C / -40°F
Operating Temperature to
+80°C / +176°F
Lifetime
Unlimited
Guarantee
3 Years