Singing Rock Lanyard "I"

Singing Rock
Code:
From £13.74
(inc. VAT)

Singing Rock Lanyard "I"

The Singing Rock Lanyard "I" is a dynamic non-adjustable rope lanyard, with terminations on each end, designed for work restraint systems. It can also be combined with an energy absorber to make a fall arrest lanyard. Lanyards have different colour sewn terminations according to their length.

Full description

Description

Singing Rock Lanyard "I"

Made from dynamic rope, the Singing Rock Lanyard "I" is a fixed length lanyard which can be combined with a shock absorbing pack to make an energy absorbing I (single leg) or Y (twin leg) lanyard*. Featuring sewn ends protected by plastic sheath to hold the connector in place and protect the terminations from abrasion, it is available in a range of lengths. 

Key Features

  • Tested pursuant to the EN 354 standard for lanyards and pursuant to the EN 795B standard for anchor devices
  • Sewn Terminations on both ends of the rope with reinforcement for placing karabiners
  • Seam is protected by a transparent plastic cover which also allows its easy inspection
  • Lanyards have different colour sewn terminations according to their length.


Specifications

Certification(s): CE EN 354, EN 795 type B, 

W2300W060 - Yellow
W2300W080  - Blue
W2300W120 - Red
W2300W150 - Black


Some recommendations on options for installation / connecting to the harness include: Maillon Rapide, Petzl Swivel Open, Semi circular Maillon Rapide or Petzl Ring Open.

IMPORTANT NOTE: These are Non Energy Absorbing Lanyards - They are NOT designed to absorb energy. On their own they must NOT be used to arrest a fall. Tape or rope lanyards to EN354 must be used in conjunction with an energy absorber (e.g. EN355) for fall arrest. It is critical (and mandatory by law) that the combined length of lanyard, absorber and connectors does NOT exceed 2m in length.

Petzl Jane Set up Diagram

FAQ's

What is the diameter of the rope in a Singing Rock Lanyard "I?

10.5mm

How do I connect (retrofit) a scaffold hook to a Jane lanyard?

You can use an 8mm Maillon Rapide (PPEDZ08 / P15) screwed on to 3.0 N.m of torque or alternatively buy a Petzl MGO Open Scaffold Hook which has a gate on the eyelet that can be opened using a Hex / Allen key to enable it to be fitted to a sewn eye.

Petzl Jane Lanyard with Connectors

  W2300W060 W2300W080 W2300W120 W2300W150
Length 60cm 80cm 120cm 150cm
Weight 100g 120g 140g 150g

 

 

Manufacturer's Downloads

 

Specification

Lanyard

Lanyard Type
Single
Energy Absorbing
without Energy Absorber
End Termination
Protected Eyelet
Working Load kN
22kN
Length
80cm, 60cm, 120cm, 150cm,

General

Industrial or Sport Use
Industrial, Sport,
Conformity
CE EN354
CE EN795 Type B
Guarantee
3 Years

Associated Products