Singing Rock Antishock I Harness

Singing Rock
Code:
From £223.21
RRP £262.60
Save £39.39
(inc. VAT)

Singing Rock Antishock I Harness

The Singing Rock Antishock I is a 5-point full body harness designed for fall arrest, work positioning and work restraint in explosive environments. This anti static harness is aimed at the petrochemical, mining and energy networks.

Full description

Description

Singing Rock Antishock I Harness


Key Features

  • All metal parts are coated with plastic with an electrical puncture resistance of 10kV
  • Double buckles conform to American Standards ANSI and NFPA
  • Double buckle on the left shoulder strap provides smooth adjustment
  • Sternal (front) and Dorsal (rear) fall arrest attachment points
  • Ventral (lower front) attachment point for descender attachment and work positioning
  • Lateral (side) and rear waistbelt mounted work positioning attachment points
  • Singing Rock Cam Clean chest ascender attachment strap (Cam Clean sold separately)
  • Loops on the shoulder straps for confined space / rescue spreader
  • 2 gear loops each with a 5kg capacity
  • 2 attachment loops on the rear harness webbing with a 35kg capacity
  • 4 small attachment loops on the top edge of the waistbelt with a 5kg capacity
  • 2 small attachment loops near the front of the leg loops with a 5kg capacity
  • Slots on the waistbelt for the Singing Rock Porter tool holder


 Accessories

Singing Rock Cam Clean
Singing Rock Porter
Singing Rock Franklin Seat
Singing Rock Franklin Seat Black


Cleaning

Wash and rinse in clean cold or warm water using pure soap e.g. Lux
soap flakes, Stergene liquid, at the approximate dilution, with pH range
5.5 and 8.5. Rinse thoroughly. 
+30°C / 86°F (max.)

Drying

Dry slowly in a well-ventilated place away from direct sources of heat or sunlight.




  W0086BO02 W0086BO03 W0086BO05
Size S M/L XL
Waist
(cm / in)
55-80 / 22-31 75-100 / 29-39 85-130 / 33-51
Leg Loops
(cm / in)
45-60 / 18-24 50-75 / 20-29 50-75 / 20-29
Weight 2050g 2100g 2150g


  

 

FAQ's

How do I attach the Singing Rock Cam Clean chest ascender to my Singing Rock Singing Rock Antishock I Harness?

Each harness comes equipped with an attachment strap (normally located on the left gear loop):

1. Remove the attachment strap from the gear loop

2. Girth Hitch (Larks foot) the attachment strap in to the top attachment hole of the Cam Clean

3. Pass the hook of the attachment strap through the gap in the webbing between the sternal attachment point and attach to the hook to the loop on the rear of this webbing

4. Fix a Delta Maillon through the webbing at the rear of the ventral attachment point and position it in front of the webbing

5. Pass the Delta Maillon through the lower attachment hole of the Cam Clean and screw the Maillon shut

6. Check correct orientation of the Cam Clean

 

 

 

Manufacturer's Downloads

Specification

Harness

Harness Type
Full Body
Specific Use
Energy & Networks, Mining Environments, Petrochemical Environments,
Harness Attachment Points
Side, Rear, Front,
Harness Size
S
XL
M/L
Nominal Maximum Load
150kg
Singing Rock Cam Clean Chest Ascender
Without Cam Clean, With Cam Clean & Maillon ,

General

Industrial or Sport Use
Industrial
Colour
Black / Yellow
Black / Yellow
Conformity
CE EN361
CE EN813
CE EN1497
CE EN358
ANSI Z359.1
NFPA 1983 Classe III
Operating Temperature from
-40°C / -40°F
Operating Temperature to
+80°C / +176°F
Lifetime
15 years (10 years from first use)
Guarantee
3 Years

Related video

Singing Rock how to attach the Cam Clean