Petzl ASAP Kit - Pre-assembled, ready-to-use fall-arrest system

Code:
From £258.00
(inc. VAT)

Petzl ASAP Kit

Pre-assembled, ready-to-use fall-arrest system

The ASAP KIT fall-arrest kit is a pre-assembled and ready-to-use system. It includes an ASAP mobile fall arrester, an energy absorber, and two OK TRIACT-LOCK carabiners with CAPTIV positioning bar. This kit is available in three versions, depending on your needs and applications.

Full description

Description

Petzl ASAP Kit

Pre-assembled, ready-to-use fall-arrest system

The ASAP KIT fall-arrest kit is a pre-assembled and ready-to-use system. It includes an ASAP mobile fall arrester, an energy absorber, and two OK TRIACT-LOCK carabiners with CAPTIV positioning bar. This kit is available in three versions, depending on your needs and applications.


Features

  • Pre-assembled kit includes ASAP mobile fall arrester, energy absorber, and two OK TRIACT-LOCK carabiners; three versions available:
    - With ASAP’SORBER energy absorber 20 (B070DA00)
    - With ASAP’SORBER energy absorber 40 (B070DA01)
    - With ASAP’SORBER AXESS energy absorber (B070DA02)
  • Mobile fall arrester for rope:
    - Stops falls and uncontrolled descents that exceed two meters per second
    - Blocks on the rope even if grabbed during the fall
    - Works on vertical, horizontal, or angled rope
    - Compatible with ropes 10 to 13 mm in diameter
    - Toothed wheel is effective on a variety of rope conditions
  • Compact and easy to use:
    - Easy to install and remove at any point on the rope
    - Moves up or down the rope without any manual operation
  • Applications:
    - Up to 140 kg, single person use with the ASAP'SORBER 20 or 40
    - Up to 250 kg, two-person use in rescue scenarios with the ASAP'SORBER AXESS

Specifications

  • Rope compatibility: 10 to 13 mm
  • Certification(s): CE EN 12841 type A, CE EN 353-2
  • CE EN 12841 type A when used with an ASAP’SORBER 20/40 or ASAP’SORBER AXESS energy absorber, and a CE EN 1891 type A 10 to 13 mm rope and an OK TRIACT-LOCK carabiner
  • CE EN 353-2 when used with an ASAP’SORBER 20/40 or ASAP’SORBER AXESS energy absorber, an AXIS 11 mm rope with two sewn terminations and an OK TRIACT-LOCK carabiner

Cleaning

Wash and rinse in clean water using pure soap
+30°C / 86°F (max.)

Drying

Dry in a well-ventilated place away from direct sources of heat or sunlight.
+30°C / 86°F (max.)

Specification

Backup Device

With/without Absorber
With Asap Sorber 20cm
With Asap Sorber 40cm
With Axess Energy Absorber
Rope or Wire Usage
Rope - Rope Access
Loading Suitability
Suitable for two person rescue
Nominal Maximum Load
140kg / 250kg (if using Sorber Axess)

General

Industrial or Sport Use
Industrial
Material
Aluminium, Nylon, Stainless Steel,
Conformity
CE EN353-2
CE EN12841 Type A
Operating Temperature from
-20°C / -4°F
Operating Temperature to
+50°C / +122°F
Lifetime
10 years (Energy Absorber), Unlimited ASAP and Karabiner
Guarantee
3 Years
Wind Farm Kit
Back Up Device