Petzl ASAP 2026 Version

Code: B070AB00
£174.00
(inc. VAT)

Petzl ASAP

Compact mobile fall arrester for rope

An essential component in your fall protection system, rely on the ASAP for everyday work at height applications. During normal use when moving along the rope, the device trails freely without the need for manual operation. In the event of a fall or uncontrolled descent (exceeding two meters per second), the device blocks the rope and stops the user. Choose the energy absorber length that best suits your needs, the ASAP’SORBER 20 or 40, to comfortably work closer or further from the rope.

Full description

Description

Petzl ASAP 

Compact mobile fall arrester for rope

An essential component in your fall protection system, rely on the ASAP for everyday work at height applications. During normal use when moving along the rope, the device trails freely without the need for manual operation. In the event of a fall or uncontrolled descent (exceeding two meters per second), the device blocks the rope and stops the user. Choose the energy absorber length that best suits your needs, the ASAP’SORBER 20 or 40, to comfortably work closer or further from the rope.

Key Features

  • Mobile fall arrester for rope:
    - Stops falls and uncontrolled descents that exceed two meters per second
    - Blocks on the rope even if grabbed during the fall
    - Works on vertical, horizontal, or angled rope
    - Compatible with ropes 10 to 13 mm in diameter
    - Toothed wheel is effective on a variety of rope conditions, such as frozen or dirty ropes
  • Compact and easy to use:
    - Easy to install and remove at any point on the rope
    - Moves up or down the rope without any manual operation
  • Use in combination with:
    - ASAP’SORBER 20 or 40 energy absorber, for use with a person weighing up to 140 kg
    - ASAP’SORBER AXESS energy absorber, for use in two-person rescue scenarios, up to 250 kg
  • The ASAP can be used as a primary belay device in a fall-arrest system or as a back-up belay in a rope access system
  • The ASAP is also available in pre-assembled kits for a ready-to-use solution, with ASAP’SORBER 20 or 40 or ASAP’SORBER AXESS energy absorbers and OK TRIACT-LOCK or Bm’D TRIACT-LOCK connectors

Specifications

  • Rope compatibility: 10 to 13 mm
  • Certification(s): CE EN 12841 type A, CE EN 353-2, ANSI Z359.15, GB/T 24537, XF 494 : FZL-Z-Q10/13
  • CE EN 12841 type A when used with an ASAP’SORBER 20/40 or ASAP’SORBER AXESS energy absorber, and a CE EN 1891 type A 10 to 13 mm rope and an OK TRIACT-LOCK carabiner
  • CE EN 353-2 when used with an ASAP’SORBER 20/40 or ASAP’SORBER AXESS energy absorber, an AXIS 11 mm rope with two sewn terminations and an OK TRIACT-LOCK carabiner
  • ANSI Z359.15 when used with an ASAP’SORBER 20/40 or ASAP’SORBER AXESS energy absorber, a BEAM 11 mm rope with two sewn terminations and a Bm’D TRIACT-LOCK carabiner
  • Weight: 190 g
  • Material(s): Aluminum, stainless steel, nylon

Cleaning

Wash and rinse in clean water using pure soap
+30°C / 86°F (max.)

Drying

Dry in a well-ventilated place away from direct sources of heat or sunlight.
+30°C / 86°F (max.)


Manufacturer's Downloads

 

Specification

Backup Device

Rope or Wire Usage
Rope - Rope Access
ASAP Conformity
CE EN 12841, EN 1891 type A - Information
CE EN 353-2 - Information
EAC - Information
ANSI Z359.15 - Information
Nominal Maximum Load
128kg

General

Industrial or Sport Use
Industrial
Material
Aluminium, Stainless Steel,
Conformity
CE EN353-2
CE EN12841 Type A
ANSI Z359.15
EAC
Weight (g)
190g
Operating Temperature from
-20°C / -4°F
Operating Temperature to
+50°C / +122°F
Lifetime
Unlimited
Guarantee
3 Years
Wind Farm Kit
Back Up Device