Reflective stickers for STRATO helmet
Reflective stickers for increased visibility of STRATO helmets.
Kask Clear Visor V2 Plus
The Kask Visor V2 Plus is their next generation polycarbonate high performance visor. The Visor V2 Plus is designed specifically for the Kask Plasma and Superplasma helmet range. It’s an Optical Class 1 visor for regular use. It provides protection against small object impact and ultraviolet (UV) light from the sunlight. The wrap-around panoramic industrial visor provides enough room to wear glasses underneath. The well-designed smooth and rounded edges provide cut-free use and the rubberised top edge helps to prevent rain ingress.
Petztl Crochlamp S Headlamp clips for thin-edged helmets (pack of 4)
Four headlamp clips for mounting a headlamp, compatible with thin-edged helmets. Allowing a headlamp to be installed on a helmet that lacks integrated headlamp clips.
Petzl Platine clip casque Pixa
Plate with helmet clip compatible with entire Pixa line.
Crochlamp L Helmet Clips
Headlamp clips for thick-edged helmets (pack of 4).
Four headlamp clips for mounting a headlamp, compatible with thick-edged helmets that lack integrated headlamp clips.
Petzl Pro Adapt Duo Headtorch Mount
Pro Adapt consists of two adhesive plates for mounting a Duo S or Duo Z2 headlamp on a helmet, and maintains the option of tilting the headlamp. The system is especially resistant to impact and moisture.
Replacement Foam Insert for Beal Mercury Helmet
Comfort form Insert for Mercury Helmets. Removable and machine washable.
Beal SKY VISOR
Eye protection during work with projections. Compatible with SKYFALL.
MSA V-Gard Helmet Mounted Hearing Protection
The V-Gard Helmet Mounted Hearing Protectors deliver enhanced comfort and top-of-the-line performance desgined to work with MSA's safety helmets.
MSA V-Gard Helmet Mounted Hearing Protection
The V-Gard Helmet Mounted Hearing Protectors deliver enhanced comfort and top-of-the-line performance desgined to work with MSA's safety helmets.
MSA V-Gard Helmet Mounted Hearing Protection
The V-Gard Helmet Mounted Hearing Protectors deliver enhanced comfort and top-of-the-line performance desgined to work with MSA's safety helmets.
Petzl Slot Adapt Headlamp Mounting Accessory
The Petzl Pixadapt is a helmet mount designed to hold a Pixa head torch on a helmet and still keep the option of adjusting the tilt of the headlamp. Pixadapt is compatible with Petzl helmets with or without eye shield. For other helmets, verify the compatibility of your glue with the helmet manufacturer.
The choice of helmet will depend on the type of work being undertaken and the environment in which it will be used. An EN397 weaker chinstrap may be more appropriate in places where there is a risk of snagging and thus a chocking hazard (such as in a confined space). Similarly, where it is important to ensure the helmet does not come off during a fall, such as, when there may be multiple impacts in a fall, the stronger EN12492 may be deemed most appropriate. For rope access, as noted in the IRATA ICOP 2.7.12, 'Users should check carefully the performance of industrial helmets conforming to European Standard EN397 as they might not have the all the performance requirements for the safety of rope access technicians, e.g. front, side and rear energy absorption capacity (not specified in EN397); appropriate chinstrap and fastening arrangement; low temperature use and ventilation (optional in EN397). Helmets utilizing expanded polystyrene shells (common in helmets conforming to European Standard EN12492) are unlikely to withstand the rigours of industrial use and, therefore, are generally not recommended'.
A guide to the Conformity Standards:
| EN397 | Industrial safety helmets |
| EN12492 | Mountaineering equipment. Helmets for mountaineers. Safety requirements and test methods |
| EN50365 | Electrically insulating helmets for use on low voltage installations |
| ANSI Z87.1 | American National Standards Institute - Occupational and Educational Personal Eye and Face Protection Devices |
| ANSI Z89.1 (class C) | American National Standards Institute - Industrial Head Protection - Class C (Conductive) provide no electrical protection |
| ANSI Z89.1 (class E) | American National Standards Institute - Industrial Head Protection - Class E (Electrical) are tested to withstand 20,000 volts |
| UIAA 106 | International Climbing and Mountaineering Federation - Helmets |
*Please note some helmets conform only in part to certain standards. Certifications for each helmet are indicated in the Manufacturer's Instructions / Instructions for Use. There is currently no specific European helmet standard for work at height.