IMPORTANT NOTICE: For use with Petzl Grillons.
Petzl Rope And MGO Replacement for Grillons
Replacement rope lanyard for Petzl Grillons, manufactured with 2 terminations and MGO. Available in 2 lengths.
For use with Petzl Grillon
Petzl Rope And Hook Replacement For Grillons
Replacement Rope and Hook Design manufactured with 2 termination flat hooks and a protective sleeve, for use with the Petzl Grillon, Available in 2, 3, 4 and 5 m rope lengths. They can be used with newer and older Grillon versions.
Lyon Industrial Cowstail 4m or 5m Lengths
A basic dynamic rope that conforms to EN892 produced by beal for Lyon. Suitable for a range of applications. This rope is supplied as a hanked bundle. Colours vary. Length 4m or 5m length, Diameter 11mm.
Petzl ANGE FINESSE
Ultra-light quickdraw
Designed for alpine climbing and situations where every gram counts, the ANGE FINESSE quickdraw is ultra-light, compact and durable. Featuring Petzl's MonoFil Keylock technology and an H-shaped cross-section, ANGE karabiners are very lightweight and offer an optimal strength/weight ratio. Strong and ergonomic, the FINESSE sling provides a good grip. The STRING quickdraw sling protector maintains the proper orientation of the karabiner making it easier to clip. Available in two lengths and two karabiner sizes.
May only be used with the Petzl ASAP and Petzl ASAP Lock fall arrester.
Petzl Asap’sorber 20cm
The Petzl Asap’sorber 20cm is designed for use with the Petzl ASAP or Petzl ASAP Lock. It allows the user to work at a distance from the back-up rope, thus protecting it from damage. .
May only be used with the Petzl ASAP and Petzl ASAP Lock fall arrester.
Petzl Asap’sorber 40cm
The Petzl Asap’sorber 40cm is designed for use with the Petzl ASAP or Petzl ASAP Lock. It allows the user to work at a distance from the back-up rope, thus protecting it from damage.
Petzl Asap’sorber Axess
The Petzl Asap’sorber Axess is designed for use with the Petzl ASAP or Petzl ASAP Lock. It allows the user to work at a distance from the back-up rope, thus protecting it from damage. Unlike the Petzl Asap’sober 20cm and 40cm versions, the Petzl Asap’sorber Axess gives a 250kg two-person rescue capacity. The Asap’sorber Axess replaces the L57.
Skylotec PEANUT I
Ultra-compact fall protection device with FS 90 ALU karabiner on anchoring. The Peanut is already equipped with the new One-4-All shock absorber and is therefore approved for the weight class 50-135 kg. 1.8 m length for use in aerial work platforms.
Non Stock Item! Extended lead-times may apply to this item. Please call for urgent orders.
Beal Mobile Lanyard
The Mobile Lanyard is certified to work with the Monitor mobile fall arrest device, enabling it to be positioned away from the operator.
Beal DynaPro Air
Fall arrest lanyard with integrated energy absorber (EN355 + EN 362) designed for work environments with a fall risk.
Beal DynaPro V Air Hook
V-shaped fall arrest lanyard with integrated energy absorber (EN355 + EN362). Designed as a progression lanyard for work environments with a fall risk, it is well adapted to structures where anchor points are cables, bars or beams.
Skylotec Lory X Adjustable Work Positioning Lanyard
(Karabiner not supplied with the Lory X)
The LORY X allows the length of a rope to be set, even under load. The handle on the device enables a fluent adjustment to an optimal working position. An integrated panic function prevents unintended rope movement if the lever is opened too far. LORY X can also be used as a backup device or lanyard.
Skylotec lory X
Replacement rope for Skylotec Lory X
Petzl Absorbica
The Absorbica is a compact energy absorber, for use in combination with a JANE lanyard to make a fall arrest lanyard. Equipped with tear-webbing inside a pouch that opens on each end, the absorber is protected from abrasion, while allowing for regular inspection. It has two options for installation on the harness, according to the frequency of manipulation.
Petzl Absorbica-I Single lanyard with integrated energy absorber
ABSORBICA-I is a single lanyard with compact energy absorber designed for progression on a horizontal lifeline (rope or cable) or on an elevated platform, without passing intermediate anchors. It has several installation options on the harness and can be used with different types of connectors. It is available in two lengths: 80 or 150 cm versions (without connectors). The 150 cm version has an elasticised arm, to avoid hindering progression. Depending on the connectors used, ABSORBICA-I is certified to American, European and Russian standards.
Petzl Absorbica-I Single lanyard with integrated energy absorber
ABSORBICA-I is a single lanyard with compact energy absorber designed for progression on a horizontal lifeline (rope or cable) or on an elevated platform, without passing intermediate anchors. It has several installation options on the harness and can be used with different types of connectors. It is available in two lengths: 80 or 150 cm versions (without connectors). The 150 cm version has an elasticised arm, to avoid hindering progression. Depending on the connectors used, ABSORBICA-I is certified to American, European and Russian standards.
Petzl Absorbica Y European version
The 2020 Petzl Absorbica Y European version is a twin leg lanyard without connectors. It provides continuous protection when you climb on a vertical structure or attach to a horizontal lifeline with a need to pass intermediate anchors
Petzl Absorbica Y European version
The 2020 Petzl Absorbica Y European version is a twin leg lanyard without connectors. It provides continuous protection when you climb on a vertical structure or attach to a horizontal lifeline with a need to pass intermediate anchors
Petzl Absorbica I Vario Adjustable single lanyard with integrated energy absorber
Absorbica I Vario is an adjustable single lanyard with compact energy absorber designed for progression on a horizontal lifeline (rope or cable) or on an elevated platform, without passing intermediate anchors. It features the VARIO adjustment system, allowing the lanyard length to be adjusted in order to reduce the potential fall height. Depending on the connectors used, Absorbica I Vario is certified to North American, European and Russian standards.
Petzl Absorbica Y Tie-Back
The 2020 Petzl Absorbica Y Tie-back is a twin leg lanyard with connector tie-back loops. It provides continuous protection when you climb on vertical structures with very large cross sections.
Petzl Absorbica Y Tie-Back
The 2020 Petzl Absorbica Y Tie-back is a twin leg lanyard with connector tie-back loops. It provides continuous protection when you climb on vertical structures with very large cross sections.
Petzl Absorbica Y MGO European version
The 2020 Petzl Absorbica Y MGO European version is a twin leg lanyard with pre-installed MGO connectors. It provides continuous protection when you climb on a vertical structure or attach to a horizontal lifeline with a need to pass intermediate anchors.
Petzl Absorbica Y MGO European version
The 2020 Petzl Absorbica Y MGO European version is a twin leg lanyard with pre-installed MGO connectors. It provides continuous protection when you climb on a vertical structure or attach to a horizontal lifeline with a need to pass intermediate anchors.
Petzl Absorbica Y MGO International version
The 2020 Petzl Absorbica Y MGO International version is a twin leg lanyard with pre-installed MGO connectors. It provides continuous protection when you climb on a vertical structure or attach to a horizontal lifeline with a need to pass intermediate anchors.
Petzl Absorbica Y MGO International version
The 2020 Petzl Absorbica Y MGO International version is a twin leg lanyard with pre-installed MGO connectors. It provides continuous protection when you climb on a vertical structure or attach to a horizontal lifeline with a need to pass intermediate anchors.
Petzl Progress Adjust-Y
Progress Adjust-Y is a double adjustable progression lanyard that enables continuous connection for all types of progression (rope ascent, moving along a traverse line...). Thanks to the Adjust rope adjuster, the length of the adjustable arm can be quickly and easily adjusted. The Tanga accessory and the plastic sheath help hold the connectors in a good position for easy clipping.
Petzl Progress Adjust-I
The Petzl Progress Adjust-I is a single adjustable progression lanyard with integrated rope adjuster made from dynamic rope. When you use it with a second lanyard it provides continuous connection for passing intermediate anchors.
Petzl Progress Adjust-I positioning lanyard
The Petzl Progress Adjust-I is a single adjustable positioning lanyard with integrated rope adjuster made from dynamic rope.
There are many different types of lanyard, with the main industrial versions fitting into 3 categories: Work Restraint, Fall Arrest and Work Positioning. A work restraint lanyard is designed to restrain the user so that they cannot get into a position where they can take a fall. If there is any possibility of a fall, then a fall arrest lanyard should be used.
Fall arrest lanyards are equipped with a shock absorbing section which will limit the force exerted on the user during a fall. In UK, EN355 requires energy absorbers to have a minimum tensile strength of 15kN and to limit the maximum impact force to 6kN. Work Restraint becomes Work Positioning the moment when the user of the lanyard start to rely on the lanyard to maintain their work position.
When using fall arrest lanyards, attention should be made to the distance below the anchor point and the ground, to ensure there is enough clearance for the lanyard to successfully, and if necessary, fully deploy, before any part of the user makes contact with the ground.
A guide to the Conformity Standards:
| EN354 | Personal protective equipment against falls from a height. Lanyards |
| EN355 | Personal protective equipment against falls from a height. Energy absorbers |
| EN358 | Personal protective equipment for work positioning and prevention of falls from a height. Belts for work positioning and restraint and work positioning lanyards |
| EN362 | Personal protective equipment against falls from a height. Connectors |
| EN567 | Mountaineering equipment. Rope clamps. Safety requirements and test methods |
| EN12841 | Personal fall protection equipment. Rope access systems. Rope adjustment devices |
| EAC | Conformity for Custom Union Countries |
| ANSI Z359.3 | American National Standards Institute - Safety Requirements for Lanyards and Positioning Lanyards |
| ANSI Z359.12 | American National Standards Institute - Connecting Components for Personal Fall Arrest Systems |
| ANSI Z359.13 | American National Standards Institute - Personal Energy Absorbers and Energy Absorbing Lanyards |
| NFPA | National Fire Prevention Association |
| CSA Z259.11 | Canadian Fall Protection Standard |
Buying Guides
We know that sometimes you need a little help with choosing the product that's right for you. We also know the typical questions our customers ask - so we've put together this comprehensive collection of buying guides, where we hope you'll find the answers buy clicking here.