Singing Rock Wind Master

Singing Rock Wind Master

Fully adjustable harness for the wind and energy sector along with rope access, featuring a padded wide waist belt, leg loops, and shoulder straps. Suitable also for work positioning, fall arrest, and work restraint situations.

Key Features

• harness is equipped with classic EN 361 front and rear attachment points for fall arrest; the rear point is recessed into the padding so it does not impede movement in confined spaces when not in use.
• In addition, there is the specific EN 361 Ladder Connection Point on the front under the chest for connection to EN 353-1 fall arrest systems, which allows freer movement on secured ladders and structures.
• If a fall is caught by the Ladder Connection Point, the auxiliary seams are ripped out and the point changes its position so that the user is not in danger of being turned head down.
• Wide waist belt with the plastic back cover equipped with the durable glides ensures comfortable movement and rest on fall arrest systems even in confined spaces.
• Shoulders have removable loops in the front for parking shock absorber hooks when they are not in use; under heavier loads, the loop is released so that a shock absorber can be safely deployed in the event of a fall.
• Upper parts of the shoulders have EN 1497 textile loops for pulling the user out in case of rescue from a confined space.
• EN 813/EN 358 front attachment point located in the front serves for resting, lowering and work positioning.
• Additional work positioning options are offered by the two EN 358 swing-out attachment points on the lateral sides of the waist belt.
• Speed buckles on the leg loops and at the waist ensure smooth and quick putting on of the harness, leaving more time for efficient work.
• Padding on the leg loops and shoulder straps evenly distributes the user's weight and thus reduces strain and fatigue.
• Waist belt is equipped with two standard textile loops with a load capacity of 5 kg, so the necessary equipment is always at hand.
• Steel buckles are E-coated for increased corrosion resistance in wet and salty environments.
• Using an additional karabiner, the Cam Clean chest ascender can be attached to the harness.
• Whether you're an experienced wind power technician or a newcomer to the industry, The singing Rock Wind Master guarantees you first-class comfort and functionality.
   

 

	W0112BY02	W0112BY03	W0112BY05
Size	S	M/L	XL
Waist (cm / in)	65-80 / 25-31	75-100 / 29-39	85-130 / 33-51
Leg Loops (cm / in)	45-60 / 18-24	50-75 / 19-29	50-75 / 19-29
Height (cm / in)	150-170 / 59-67	160-180 / 63-71	175-205 / 69-81

Accessories

Singing Rock Cam Clean
Singing Rock Porter
Singing Rock Franklin Seat
Singing Rock Franklin Seat Black

Cleaning

Wash and rinse in clean cold or warm water using pure soap e.g. Lux
soap flakes, Stergene liquid, at the approximate dilution, with pH range
5.5 and 8.5. Rinse thoroughly. 
+30°C / 86°F (max.)

Drying

Dry slowly in a well-ventilated place away from direct sources of heat or sunlight.

 

FAQ's

How do I attach the Singing Rock Cam Clean chest ascender to my Singing Rock Wind Master harness?

Each harness comes equipped with an attachment strap (normally located on the left gear loop):

1. Remove the attachment strap from the gear loop

2. Girth Hitch (Larks foot) the attachment strap in to the top attachment hole of the Cam Clean

3. Take a karabiner from the rear of the ventral attachment point

4. Connect the lower attachment hole of the Cam Clean to this karabiner and reconnect it to the rear of the ventral attachment point (check correct orientation of the Cam Clean)

5. Pass the hook of the attachment strap through the gap in the webbing between the sternal attachment point and attach the hook to the loop on the rear of this webbing

6. Check correct orientation of the Cam Clean

 

 

 

Manufacturer's Downloads