Petzl Jane Lanyard

From £22.44
(inc. VAT)

Petzl Jane Non-adjustable Rope Lanyard

Petzl Jane Lanyard is a dynamic non-adjustable rope lanyard, with terminations on each end, designed for work restraint systems. It can also be combined with a Petzl Absorbica energy absorber to make a fall arrest lanyard.

Full description


Petzl Jane I Single Rope Lanyard

Made from dynamic rope, the Petzl Jane is a fixed length lanyard which can be combined with an Absorbica shock absorbing pack to make an energy absorbing I (single leg) or Y (twin leg) lanyard*. Featuring sewn ends protected by plastic sheath to hold the connector in place and protect the terminations from abrasion, it is available in a range of lengths. 

Key Features

  • Non-adjustable dynamic rope lanyard that can be combined with an ABSORBICA energy absorber to make a single energy-absorbing lanyard with a maximum length of two meters
  • Easy handling, thanks to the plastic sheath that holds the carabiner in position and facilitates clipping while protecting the termination from abrasion
  • Offers several configurations for setting up a temporary anchor: directly to an anchor point or around a suitable structure
  • Individual identification marking on plastic sheath, to track equipment throughout its lifespan
  • Available in several lengths: 60, 100 and 150 cm


Certification(s): CE EN 354, EN 795 type B, EAC, ANSI Z359.3; CSA Z259.11
Material(s): polyester

Some recommendations on options for installation / connecting to the harness include: Maillon Rapide, Petzl Swivel Open, Semi circular Maillon Rapide or Petzl Ring Open.

IMPORTANT NOTE: These are Non Energy Absorbing Lanyards - They are NOT designed to absorb energy. On their own they must NOT be used to arrest a fall. Tape or rope lanyards to EN354 must be used in conjunction with an energy absorber (e.g. EN355) for fall arrest. It is critical (and mandatory by law) that the combined length of lanyard, absorber and connectors does NOT exceed 2m in length.

Petzl Jane Set up Diagram


What is the diameter of the rope in a Jane lanyard?


How do I connect (retrofit) a scaffold hook to a Jane lanyard?

You can use an 8mm Maillon Rapide (PPEDZ08 / P15) screwed on to 3.0 N.m of torque or alternatively buy a Petzl MGO Open Scaffold Hook which has a gate on the eyelet that can be opened using a Hex / Allen key to enable it to be fitted to a sewn eye.

Petzl Jane Lanyard with Connectors

  L050BA00 L050BA001 L050BA02
Length 60cm 100cm 150cm
Weight 100g 120g 145g



Manufacturer's Downloads




Lanyard Type
Energy Absorbing
without Energy Absorber
60cm, 100cm, 150cm,
End Termination
Protected Eyelet
Nominal Maximum Load


Industrial or Sport Use
Industrial, Sport,
ANSI Z359.3
CSA Z259.11
CE EN354
CE EN795 2012
Weight (g)
100g, 120g, 145g,
10 Years
3 Years

Associated Products