SAS Mobile Deadweight Anchor Trolley

SAS
Product code:
From £1,740.00
(inc. VAT)

Portable Deadweight Trolley

Designed for use in industrial rope access and for fall arrest purposes, the deadweight trolley is a portable anchor device for use behind structural handrails, balustrades and parapet walls.

Full description

Description

Portable Deadweight Trolley

The Deadweight Trolley is ideal for use where space is limited or where there are no suitable anchor points available, such as on bare flat roofs (with a structural handrail, balustrade or parapet wall - Where there are none of these it may be possible to tie the trolley back to structural anchor points). There is no need to penetrate the roof surface/membrane, eliminating any need for alteration to building aesthetics.

The Deadweight Trolley is made up of a frame weighing approximately 28kg and 6 x 25kg weights. Quick and easy to set up, store and transport, it can be moved sideways easily without dismantling, thus reducing de-rigging / re-rigging time.

IMPORTANT NOTE!: Must be used on a roof with a parapet wall or structural handrail (as specified by a structural engineer) Minimum upstand of 60cm Normally a structural handrail is one where the base plate is bolted into the structure of the building. In a fall arrest situation the DWT must be used so that the operator is inline with the equipment’s direction of fall and where a pendulum cannot occur.

Key Features

  • Ideal for confined working spaces (Requires working area of only 40cm x 50cm so will fit into a small lift!).
  • Static load tested.
  • Safe working load 250kg (Suitable for a two person rescue).

Technical Information

  • Total Weight (including frame): 178kg.
  • Weight of individual weights: 25Kg x 6.
  • Body material: Mild steel
  • Finish: Powder Coated Orange
  • Safe Working Load (SWL): 250Kg
  • Approved standards CE Approved to: EN795:2012
  • Designed & manufactured in accordance with BS7883:2005
  • Assists users to work in accordance with BS7985:2002
  • Individually Serial Numbered

FAQ's

How often do the trolleys need testing and how do I go about getting it done?

The Deadweight trolley needs testing every 6 months from the date of purchase, the first inspection date will be stated on the certificate. A visual check is also recommended before each time of use. The Deadweight trolley can be sent back to the manufacturer for inspection or a qualified inspector can travel to site to inspect (Please call for details).

Please NOTE: We can fit 2 x Deadweight trolleys on one pallet, so if you are requiring more than one trolley, please call us to order (it will save you £150 + Vat carriage!).

Special order item. Extended lead-times may apply to this item. Please call for urgent orders. Only returnable for manufacturing fault.

 

 

Manufacturer's Downloads

 

Specification

Deadweight Anchor

Body Finish
Powder Coated Orange
Individual Weights
25kg
No of Indiviual Weights
6 Weights
Safe Working Load
250kg
Collect from Manufacturer (Swindon) / Delivery
Delivery, Collect from Swindon,

General

Industrial or Sport Use
Industrial
Body Material
Mild Steel
Conformity
BS7883: 2005
BS7985: 2002
CE EN795 2012
Weight (kg)
178kg