New Petzl I’D EVAC

In April 2019, Petzl will launch their new range of I’D’s; including the new Petzl I’D EVAC.

Petzl I’D EVAC – Specific design

Like the PetzlĀ I’D S and I’D L, the I’D EVAC is a self-braking descender with anti-panic function. However, there are a couple of clear differences. Firstly, to make lowering from an anchor more ergonomic, it’s handle orientation has been changed. Secondly, the inclusion of the auxiliary open brake means friction can easily be increased for handling heavy loads or using thinner rope.

D020CA00 Petzl I'D EVACD020CA00 Petzl I'D EVAC

D020CA00 – Petzl I’D EVAC – yellow

Similarities to the I’D S

  • Easy rope installation thanks to the rope guide and markings on the moving side plate
  • The safety gate allows the rope to be installed without disconnecting the device
  • Anti-panic function – helps to reduce the risk of an uncontrolled descent
  • AUTO-LOCK system – automatically locks the rope without having to manually move the handle or tie-off
  • Stainless steel wear plate – improves durability
  • Two descent modes – over the stainless steel wear plate or in the v-shaped rope friction channel
  • You can take up rope with the handle in the locked position. For instance, for a reverse haul system
  • You can screw shut the moving side-plate for incorporation in a pre-rigged rescue kit
  • Anti-error catch – helps to prevent incorrect rope installation
  • 250kg load capacity
  • Rope diameter 10mm-11.5m
D020CA00 Petzl I'D EVAC

In conclusion, the new Petzl I’D EVAC is well designed and provides a useful and ergonomic solution for lowering loads from an anchor.

Certification

  • EN 341 type 2 class A, when used with a PARALLEL 10.5 mm or AXIS 11 mm rope
  • EN 12841 type C, when used with a 10 to 11.5 mm EN 1891 A rope
  • ANSI Z359.4, when used with a 10 to 11.5 mm rope
  • NFPA 1983 Technical Use, when used with a 10 to 11.5 mm rope
  • EAC

Available in two colours:

  • D020CA00 – yellow
  • D020CA01 – black