A-Frame Deadweight Anchor

The SAS A-Frame Deadweight Anchor is a portable anchor and is ideally suited to flat roofs with parapet walls between 300 mm and 1.8 m high. It can be used for both rope access and fall arrest purposes and provides two high anchor points. Assembly is quick and easy thanks to the spring-loaded sword pins; which eliminate the need for nuts and bolts. If used correctly, the pneumatic tyres will not damage roof membranes.

SAS A-Frame Deadweight Anchor

A-Frame Deadweight Anchor – Advantages

  • Easy to assemble
  • 2 m high anchor points
  • Can be moved sideways when fully assembled
  • No damage to surfaces or building structure
  • Doesn’t require structural anchor points

SAS A-Frame Deadweight Anchor

A-Frame Deadweight Anchor – Specification

  • Safe Working Load (SWL): 250 kg
  • 2-person rescue capacity
  • Total weight: 390 kg
  • Life span: 10 years
  • Minimum recommended upstand: 300 mm
  • Orange powder coated mild steel frame
  • 2x white coated galvenised steel eye-bolts
  • 12 x 25 kg weights with handle
  • Built-in shock absorber
  • 7-piece frame
  • Spring-loaded zin plated sword pins
  • Locking wheels with pneumatic tyres
  • Height: 2.15m
  • Length: 1.93m
  • Width: 1.42m
  • Individually Serial Numbered

SAS A-Frame Deadweight Anchor weight box

A-Frame Deadweight Anchor – Certification

  • EN 795:2012 – type E
  • Designed in accordance with BS 7883:2005 – Code of practice for the design, selection, installation, use and maintenance of anchor devices conforming to BS EN 795
  • Meets IRATA ICoP minimum recommended static strength of 15 kN
  • Meets the requirements of PD CEN/TS 16415:2013 for 2-person rescue
  • Conforms to the manual handling lifting and lowering guidelines (maximum component part 25 kg)

SAS A-Frame Deadweight Anchor pneumatic wheel

Limitations

Friction, and therefore effectiveness, can be reduced in a number of ways:

  • Using less than the recommended number of weight plates (all 12 must be correctly used at all times)
  • The type of roof finish. For example, gravel ballast, concrete pavers, green roof, membrane etc.
  • Surface water
  • Icy conditions
  • Excessive roof slope
  • Moss / Lichen or other contaminants on the roof
SAS A-Frame Deadweight Anchor 25 kg weight plate

https://www.abaris.co.uk/prod/anchors/Abaris-A-Frame-Deadweight-Anchor.htm