MR Ronin MR400 ASCENDER

Ronin MR400 Powered Ascender

The machine is the lightest on the market. It weighs only 11kg with battery. It works at its best with ropes with 2-3% elasticity. It is quick and flexible to use. The batteries are changed easily and safely also when used at a height.

The Ascender is certified for a maximum weight of 400 lbs/181kg, but with the right rope it can lift 250 kg e.g. in a rescue situation. As a safety measure, there is an automatic overheating device which stops the motor if it is overheated. After a short rest it can be run again. We recommend, however, that during regular conditions, you work in accordance with the certification of the ascender – maximum 400 lbs/181kg – so as not to damage it.

The throttle lever for going up or down, a continuous scroll switch, is adjusted with your thumb. Controlled lowering without the help of the motor can be done manually with a mechanical friction brake.

A Ronin ascender grabs hold of the rope through letting it be wound 2,5 times around a driving axis. This means that a Ronin ascender can lift more weight than others throughout time when using muddy ropes. Other ascenders grab rope with the help of blade wheels. It is not unusual that ropes full of e.g. concrete dust, wear these blade wheels down, which results in high costs for service and spare parts. Those using a Ronin ascender will not have to experience that.

ROPES TO BE USED IN THE ASCENDER:

• EN 1891 and EN 564
• Aramid or core jacket ropes.
• 2-3% elasticity is recommended (the lower the better).

As the rope passes through the ascender with its end at start-up there are certain demands. The end of the rope should be rounded and without shrink-wrap marking or tape. The end of the rope should be similar to a tip of an index finger.

PRODUCT LIST:

• 1 Ronin MR400 Ascender.
• 1 Battery.
• 1 Charger.
• 1 Charger cable type A, C, G
• Hard Case - Optional extra (Please choose above)

Others – at the bottom of the page there are films which show among other things – A Ronin MR400
shown in section, how to load a rope, what the end of the rope should look like etc.

Hard Case

Ronin hard case for handling and storage of your MR400 in safe but also extreme environments. The case is compact and easy to handle also when it is heavily loaded. This Hard Case makes it easier not only for transportation between workplaces, but also when your equipment should be sent somewhere else with an external forwarder. Negligible risk of external influence during transport

Room for 2 batteries plus other kit.