- Grid view
- List view
- Large grid view
The General Purpose (Ruth Lee) Training Dummies are the most popular models for the common rescue scenarios such as working at height, confined space, USAR, RTA etc and general handling exercises.
They are weighted to produce an anatomically correct weight distribution and the 'feel' of an unconscious patient.
They totally eliminate the risk of pinch welts and bruising being inflicted on trainees, a common injury when using plastic bodied dummies which usually have hard limb joints - for example when a hard knee joint folds over the forearm of a trainee. The training dummies have soft outer layers and have no hard joints - in fact you can forcibly wrap a knee joint around a trainees forearm with no risk of injury.
These training dummies are tough enough to be buried under concrete, have steel lintels, concrete slabs, trees or motor vehicles laid upon them to present a realistic scenarios for rescuers.
The protective overalls keep the training dummy clean, and greatly increases the lifespan; they are produced using cotton/polyester woven fabric and are reinforced with high density polypropylene webbing in identified high stress areas. The ends of the arms are further protected with Nylon reinforced PVC. The machine washable overalls are fitted to all sizes of dummy.
The General Purpose training dummies can be used in temperatures up to 100ºC. Above this temperature or where 'flash-over' may occur we recommend using our Flame Retardant Rescue Training Dummy.
All training dummies of 20Kg and over are supplied complete with Wellington boots. The boots protect the legs if the dummy is dragged along the ground.
The General Purpose training dummy is ideally suited for 'dry' rescue conditions. If it gets wet it needs to be hung in a dry airy place to dry before storage. For a wet environment rescue scenario, such as a chemical spillage, storm drain or cave rescue where the dummy needs to lie in water for any period we recommend using the HazMat Rescue Dummy which has the same inner construction but the outer carcass is made of a tough nylon reinforced PVC material which is ideally suited for this purpose.
All training dummies are screen printed with a warning triangle, a handling risk note and space for you to record the asset number the date of purchase on the head. These dummies have been issued with NATO stock numbers as below.
General Purpose Adult Dummy Product detail
As can be seen from the image with the overalls removed, the Multi Purpose training dummy has an outer carcass of 425g rot-proof canvas with all seams double stitched. High density polypropylene webbing provides extra strength and durability, especially at the high stress points.The flexible inner core is weighted to human proportions using 2Kg packets of 5-10 mm crushed, washed stone aggregate. The weight packets are then sewn into a nylon inner, with all these body parts (arms, legs, chest etc) tied to the outer carcass using Polypropylene webbing. This method of construction prevents 'slumping' of the weight pouches and allows the dummy to maintain it's shape when in use. These inner components are separated and padded using 25mm polyurethane foam which results in a dummy with the life-like feel of a real casualty.
The new shaped head, also recently introduced, allows the fitting of most types of immobilisation collars, allowing this additional technique to be included in the training scenario.