Petzl Coeur Bolt Stainless Steel 10mm hanger plate – 20 pack
The Petzl Coeur Bolt Stainless Steel 10mm hanger plate is designed for outdoor environments not aggressive enough to cause Stress Corrosion Cracking (SCC). Pack of 20
Petzl Coeur Goujon Complete Stainless Steel anchor assembly 12mm - 20 Pack
Multi-directional, Stainless steel hanger plate with expansion bolt 12mm, with anti-rotation system. Stainless steel designed for typical exterior use. Pack of 20
Petzl Coeur Bolt HCR Stainless Steel 12mm hanger plate – 20 pack
The Petzl Coeur Bolt HCR Stainless Steel 12mm hanger plate is designed for aggressive outdoor environments likely to cause Stress Corrosion Cracking (SCC).
Tractel Rollbeam Push Travel Trolley
The Tractel Rollbeam Push Travel Trolley is designed to be easily fitted to a wide range of beams and can be used as an anchor for suspended access such as rope access.
Tractel Rollclamp Personal Portable Anchor
The Tractel Rollclamp (Dover Clamp) anchorage device is designed to provide safety against falling for persons working on RSJ (H or I beam) metal structures and is intended for use with a lanyard with shock absorber or a Blocfor retractable lanyard.
Petzl Coeur Steel Hanger 10mm - 20 Pack
Multi-directional, steel hanger plate 10mm with anti-rotation system. Standard steel designed for interior uses or non-permanent installations. Pack of 20
Petzl Coeur Steel Hanger Plate 12mm - 20 Pack
Multi-directional, steel hanger plate 12mm with anti-rotation system. Standard steel designed for interior uses or non-permanent installations. Pack of 20
Petzl Coeur Stainless Steel Hanger 12mm - 20 Pack
Multi-directional, stainless steel hanger plate 12mm with anti-rotation system. Stainless steel designed for typical exterior use. Pack of 20
Petzl Coeur HCR (High Corrosion Resistance) Hanger 12mm - 20 Pack
Multi-directional, HCR (High Corrosion Resistance) hanger plate 12mm with anti-rotation system. HCR steel designed for ultra-corrosive environments. Pack of 20.
Petzl Coeur Goujon Complete steel anchor assembly 10mm - 20 Pack
Multi-directional, steel hanger plate with expansion bolt 10mm, with anti-rotation system. Standard steel designed for interior uses or non-permanent installations. Pack of 20
Petzl Coeur Goujon Complete steel anchor assembly 12mm - 20 Pack
Multi-directional, steel hanger plate with expansion bolt 12mm, with anti-rotation system. Standard steel designed for interior uses or non-permanent installations. Pack of 20
Lyon Anchora
The Lyon Anchora is an anchor device that is designed with climbing walls and technical training centres in mind. The Anchora has five attachment points designed to allow different connecting and loading configurations.
DMM Talon Ground Anchor
The DMM Talon is a steep earth / ground anchor suitable for a variety of applications, made from lightweight aluminium.
Rock Exotica Enforcer Loadcell
The Rock Exotica Enforcer is a compact aluminium load cell that measures force up to 20 kN. Utilizing two sampling modes, the Enforcer is able to monitor systems and log drop testing in high resolution. Unique features like Bluetooth connectivity and swivel attachment points separate the Enforcer into a class of its own.
IMPORTANT NOTICE: For use with iPhone IOS operating system only, (The app is not available on Android).
Petzl Collinox 10 mm resin anchor - Pack of 10
The Petzl Collinox is a 10mm diameter forged stainless steel anchor designed for long-term installation. Textured stem for better application and adhesion of resin fixing.
Pack of 10.
Please note! This item is not available for export.
Petzl Batinox Resin Glue
Required for placing the Batinox anchor. Box of 10. Not available for export.
Petzl Batinox Resin Fixing Anchor
Petzl Bat'inox 14 mm resin anchor. Especially suited for soft rock. Textured stem for better resin application and adhesion.
Please note! This item is not available for export.
Petzl Collinox Resin Glue
Please note! This item is not available for export.
Ampoule Collinox Resin Glue. Required for placing the Collinox anchor. Box of 10.
Portable Deadweight Trolley
Designed for use in industrial rope access and for fall arrest purposes, the deadweight trolley is a portable anchor device for use behind structural handrails, balustrades and parapet walls.
Petzl Coeur Stainless Steel Hanger 10mm - 20 Pack
Multi-directional, Stainless steel hanger plate 10mm with anti-rotation system. Stainless steel designed for typical exterior use. Pack of 20
Petzl Coeur Pulse 8mm Anchor for caving
The 8mm Petzl Coeur Pulse is a temporary 8 mm anchor, composed of an aluminium hanger and a stainless steel shaft, designed for caving suspension and equipment. Quick to place or remove, The Petzl 8mm Coeur Pulse allows for a more comfortable and safe practice.
SAS A-Frame Deadweight Anchor
The A Frame Deadweight Rope Access Anchor is suitable for use on flat roof surfaces behind a parapet wall, with a minimum height of 300mm and a maximum height of 1.8m.
At Height UK Sliding I-Beam Anchor
A removable and reusable sliding I-beam anchor, easy to place and remove. This anchor is designed to easily glide along the beam while trailing the worker. This can be used at both overhead and foot level heights.
G-Force Adjustable Beam Clamp
This aluminium lightweight portable anchor device is perfect for working on steel beams, designed as a one person safety device to prevent falls from height. Marked with an individual serial number.
SpanSet Temporary Horizontal Safety Line 20m
The SpanSet device allows easy adjustment between the two anchor points. It is designed as a single person temporary horizontal lifeline and provides fall protection when working at or near exposed edges.
This kit comes complete with 20m of static webbing line a ratchet tensioner, 2 x karabiners rated to 50kN and a carry bag.
Tractel Rollclamp Personal Portable Anchor
The Tractel Rollclamp (Dover Clamp) anchorage device is designed to provide safety against falling for persons working on RSJ (H or I beam) metal structures and is intended for use with a lanyard with shock absorber or a Blocfor retractable lanyard.
DMM Stal Anchors
Independent and equalised stainless steel climbing wall anchors featuring low profile updated 'pucks'.
ClimbTech Beam Walker Super Slider - Large
A removable and reusable sliding I-beam anchor, easy to place and remove. This anchor is designed to easily glide along the beam while trailing the worker.
D-ring is centred on the anchorage connector for ease of sliding on beam flanges. Particularly in rope access applications, bodyweight may disengage the centring feature in some loading conditions. This is not a safety concern, but it may affect usability.
ClimbTech Fixed-Vertical Beam Anchor
This Fixed-Vertical Beam Anchor is a fixed I-beam anchor that is easy to operate and designed to clamp onto a vertical or horizontal I-beam to create a fixed anchor point.
Non Stock Item! Each Hydrajaws is a made to order, non-returnable item.
Hydrajaws M2000 Pro Tester
The Hydrajaws M2000 Pro Tester is used for pull testing a range of EN795 anchors. As standard this kit comes complete with adaptors for testing Petzl Coeur hanger plate expansion bolts.
3M DBI-SALA Sliding Beam Anchor
The DBI-SALA Sliding beam anchor is an adjustable EN795 beam anchor, designed for fall arrest and suspension (such as rope access). Easy fitting to beams widths between 9cm and 35.5cm, up to 3.2cm flange thickness.
Lyon Ground Anchor Stake
A hot forged steel round section anchor stake with a unique head form that allows use of the Inpingo insertion and removal tool.
The secondary ring of the head form assists in captivating a stake lashing or linking strap used when linking stakes to form an appropriate anchorage for a rescue or work system.
Petzl Coeur Pulse 12mm Removable Anchor 2023
The Coeur Pulse 12 mm is a removable, high-quality stainless steel anchor that can be installed and removed for reuse very simply and rapidly without tools. The locking function limits the risk of accidental removal. The Coeur Pulse hanger can rotate once installed and when laterally loaded during use, allowing it to better align with the systems in place.
Irudek Orbyt Deadweight Anchor
Deadweight anchor point with a revolutionary design, consisting of ten 25 kg counterweights and a base part with two rotating anchorage rings.
Ideal for use on roofs with a maximum slope of 5º.
Setting up anchors is an important part of the industry and not to be taken lightly. At Abaris we stock a full range of equipment to allow for most site situations and the ability to test the safety and integrity of the anchors.
A guide to the Conformity Standards:
Safety Requirements for Personal Fall Arrest Systems, Subsystems and Components.
| EN566 | Mountaineering equipment. Slings. Safety requirements and test methods. |
| EN795 | Personal fall protection equipment. Anchor devices. |
| EN959 | Mountaineering equipment. Rock anchors. Safety requirements and test methods. |
| ANSI Z359.1-2007 | Safety Requirements for Personal Fall Arrest Systems, Subsystems and Components. |
| ANSI Z359.7-2011 | Qualification and Verification Testing of Fall Protection Products. |
| EAC | EurAsian Conformity marking confirms full compliance with the “Basic Safety Requirements”, which are specified in the Technical Regulations. |
| CEN/TS 16415 | Personal fall protection equipment. Anchor devices. Recommendations for anchor devices for use by more than one person simultaneously. |
Buying Guides
We know that sometimes you need a little help with choosing the product that's right for you. We also know the typical questions our customers ask - so we've put together this comprehensive collection of buying guides, where we hope you'll find the answers buy clicking here.